LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   PCM Diagnostics & Tuning (https://ls1tech.com/forums/pcm-diagnostics-tuning-7/)
-   -   Question about tuning and idle (https://ls1tech.com/forums/pcm-diagnostics-tuning/929541-question-about-tuning-idle.html)

TABird2K+1 05-30-2008 02:54 PM

Question about tuning and idle
 
Hey guys. I recently had my car tuned and have a question. It’s a LS1 six-speed with a 228 cam on a 112lsa, headers and cat-back. Everything else is stock. Occasionally, the idle will dip when stopping or pressing in the clutch. Sometimes it stalls, but not often. Tuner said it will take a little time for the computer to “learn” everything and offered to make adjustments as needed. Problem is, I don’t have the time to take it back right now. Is what he said correct and can I expect it to “learn” the new tune? I’ve only driven the car a few times since the tune and only put about 100 miles on it. Should I give it more time or is there anything I can do until I can take it back to the tuner? I've searched and read all the posts I could find including the stickies, not sure if adjusting the TB set screw will work as I don't have a way to monitor the IAC or TPS other than a volt meter. Thanks in advance for the help guys.

ZL1Killa 06-01-2008 06:17 PM

how often is it stalling? if you get a chance just run back to the tuner and get him to log IAC values and airflow values for idle during driving around and such.

edcmat-l1 06-01-2008 07:04 PM

Find another tuner................

johnnydje 06-01-2008 07:20 PM


Originally Posted by edcmat-l1 (Post 9474728)
Find another tuner................

My thoughts too.shoudn't be experincing any issue's you have,WHO did your tune?


All times are GMT -5. The time now is 06:59 AM.


© 2024 MH Sub I, LLC dba Internet Brands