MAFT directions?
08-12-2003, 05:50 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (11)
Join Date: Oct 2002
Location: Catonsville, MD
Posts: 672
Likes: 0
Received 0 Likes
on
0 Posts
MAFT directions? Anyone have a copy of the MAFT directions they can send me. I bought mine used and just wanted to make sure of what I was doing before I hook it up.
thanx
zack
thanx
zack
08-12-2003, 07:27 PM
#2
TECH Enthusiast
Thread Starter
iTrader: (11)
Join Date: Oct 2002
Location: Catonsville, MD
Posts: 672
Likes: 0
Received 0 Likes
on
0 Posts
Re: MAFT directions? ok...I found the adjustment instrustions under the cover of the MAFT. Now my question is how do I know how much to adjust it. I only need to adjust my fuel to be richer at WOT. My last dyno when I got higher in the RPM's especially when I sprayed I was too lean at WOT.
thanx for any advice/suggestions
thanx for any advice/suggestions
08-12-2003, 07:34 PM
#3
Re: MAFT directions? you really need A-tap or get back up to the dyno. but i wouldnt go more than 1 click Rich w/o any kind of tuning device. from the multiple cars i have a-taped i have never went over 1 setting rich. it would be nice if the settings were smaller than 5% but it will get you close. if you go to far you'll know cause you'll smell gas. the WOT will vary on your mods and the dyno was the place i had mine set
JR
JR