part throttle tuning help
Thread Starter
TECH Resident
Joined: Mar 2002
Posts: 776
Likes: 0
From: Augusta GA, Atlanta GA (school)
part throttle tuning help I just recently installed a futral 230/236 .595/.599 113 cam. I have ls1edit and looking to do some part throttle tuning. I have the stock maf which has been ported and descreened. I was have heard about using the IFR table and the MAF table to tune for part throttle. I was wondering which way would be the best way for me to go since my maf has been changed.
Re: part throttle tuning help I would start by multipying the whole ifr table to get the ltrims in the ballpark. Only play with the maf table if you can't get the mixture right. Increasing the ifr tables leans out the mixture, and decreaseing richens it up.
