OLSD idling help
#22
aaaaaaaaaand back, i had the key in the on position with out the engine running the kPa was at 102
here's the log with the EH1 file
http://reject.sleepingz.com/HPT/EH1.hpl
here's the log with the EH1 file
http://reject.sleepingz.com/HPT/EH1.hpl
#23
Banned
iTrader: (10)
aaaaaaaaaand back, i had the key in the on position with out the engine running the kPa was at 102
here's the log with the EH1 file
http://reject.sleepingz.com/HPT/EH1.hpl
here's the log with the EH1 file
http://reject.sleepingz.com/HPT/EH1.hpl
IPW is down to 1.9 though.
#25
i set the wideband up per instructions on the stickies.
https://ls1tech.com/forums/pcm-diagnostics-tuning/496625-how-log-your-wideband-hptuners-without-eio.html
Wideband setup
My wideband is a LC1. your procedure may differ if you have a different wideband...
turn on the wideband.
open LM programmer
on the second output (the one you wired in above):
set it to 10:1 AFR at 0v
set it to 18:1 AFR at 5v
open the advanced button, and select 1/6. this is important.
click the program button to program the LC1.
https://ls1tech.com/forums/pcm-diagnostics-tuning/496625-how-log-your-wideband-hptuners-without-eio.html
Wideband setup
My wideband is a LC1. your procedure may differ if you have a different wideband...
turn on the wideband.
open LM programmer
on the second output (the one you wired in above):
set it to 10:1 AFR at 0v
set it to 18:1 AFR at 5v
open the advanced button, and select 1/6. this is important.
click the program button to program the LC1.
#29
on the other scan i dont remember the AFR but on the EH2 scan the AFR was around 11.7-12.2:1
on the scan the cells that read 10:1 is just the sensor warming up, after the sensor had warmed up the AFR (at the begining of the start up) was at around 20:1 then it started to settle down.
here is the scan with the EH2 file
http://reject.sleepingz.com/HPT/EH2.hpl
on the scan the cells that read 10:1 is just the sensor warming up, after the sensor had warmed up the AFR (at the begining of the start up) was at around 20:1 then it started to settle down.
here is the scan with the EH2 file
http://reject.sleepingz.com/HPT/EH2.hpl
#36
was just doing some searching around on other people's tunes on the HPT rep and i was noticing that the only thing people are tuning are for the injector sizing....nothing else. why's that?
stock
26.41431 26.60033 26.78634 26.91036 27.09637 27.28239 27.40640 27.59241 27.71643 27.90244 28.02645 28.21247 28.33648 28.52250 28.64651 28.83252 28.95653
and the 60 scaled table (that i made)
69.26006 69.69410 70.12814 70.56218 70.99621 71.43025 71.86429 72.23632 72.67036 73.10440 73.47643 73.91047 74.28250 74.71654 75.08857 75.52261 75.89464
stock
26.41431 26.60033 26.78634 26.91036 27.09637 27.28239 27.40640 27.59241 27.71643 27.90244 28.02645 28.21247 28.33648 28.52250 28.64651 28.83252 28.95653
and the 60 scaled table (that i made)
69.26006 69.69410 70.12814 70.56218 70.99621 71.43025 71.86429 72.23632 72.67036 73.10440 73.47643 73.91047 74.28250 74.71654 75.08857 75.52261 75.89464
#38
charging up the battery on the laptop.... kinda forgot to plug the other end into the wall
on OLSD will it still use the ST/LTFT's? i dont have any NB's anymore i got your IPW and the other's logged.... now we play the waiting game for the computer to charge up
on OLSD will it still use the ST/LTFT's? i dont have any NB's anymore i got your IPW and the other's logged.... now we play the waiting game for the computer to charge up