Need a Headlight Assembly Tutorial
Need a Headlight Assembly Tutorial I tried searching the forum and googling it but couldnt find a complete one with pictures. If anybody knows a link to a good one or even better, make one for a trans am/firebird, it would help alot, thanks!
Originally Posted by matthewjernigan
a complete one with pictures
The sticky on the top of the forum mainly deals with the headlight GEAR. im talking about pulling the whole puppy out and putting in a new one. I just got mine off ebay and id like to have some knowledge on how to put it in, MEANYFACE
7 Second Club
iTrader: (5)
Joined: Nov 2001
Posts: 8,834
Likes: 1
From: Gainesville, Florida # of drag strips runs: ?!?!?
If you are refering to pulling the entire capsule, cover and such and replacing it, check out the headlight gear topic. It gives a link to the supplier's website and there is a video about doing the gear install on a 98-up model linked on the website. The install includes removal of the capsule for additional clearance.
It requires a phillips head screwdriver, a 10mm wrench and a 30-torx bit. I just did it 2 days ago, and it's easier to watch than to try and explain.
Derek
It requires a phillips head screwdriver, a 10mm wrench and a 30-torx bit. I just did it 2 days ago, and it's easier to watch than to try and explain.
Derek
Joined: Dec 2001
Posts: 12,829
Likes: 30
From: Central Indiana Honors: 4th grade spelling bee contestant
If reading the sticky doesn't help you, please post your question again in there. That sticky gets read a lot by several very competent members.
