Need brackets for my Project
07-16-2007, 08:31 PM
#1
Staging Lane
Thread Starter
iTrader: (4)
Join Date: Mar 2007
Location: Slaughter Louisiana
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Need brackets for my Project Hello, 
I am in the process of relocating my A/C, Alt and PS on y LS1. I purchased a Jamison Frame and I am putting a LS1 motor on the frame. The application I am using is for a 67 corvette with 94 corvette suspensions. I have to move the A/C compressor to the top right of the LS1 and the Alt to the top left and the PS just under the Alt. I found some bracketrs and idler pullys from Street And Performance, however all they have are the polished and chromed (no just blck metal baracket) for 900.00. I would like to find some a little less expensive. I knwo S&P have the best, I just need something not so $$$.
Please e mail me if you havae any suggestions,
Thanks George
remmetter00@aol.com
I am in the process of relocating my A/C, Alt and PS on y LS1. I purchased a Jamison Frame and I am putting a LS1 motor on the frame. The application I am using is for a 67 corvette with 94 corvette suspensions. I have to move the A/C compressor to the top right of the LS1 and the Alt to the top left and the PS just under the Alt. I found some bracketrs and idler pullys from Street And Performance, however all they have are the polished and chromed (no just blck metal baracket) for 900.00. I would like to find some a little less expensive. I knwo S&P have the best, I just need something not so $$$.
Please e mail me if you havae any suggestions,
Thanks George
remmetter00@aol.com
