Scratch Race Car Classes
#1
Scratch Race Car Classes
The Scratch Race Car Class is continuing to develop as a number of track-day car builds.
The class now has two websites with the additional website representing the direction that the class has been pulled.
http://www.kbhscape.com/racing.htm
http://www.kbhscape.com/racingnote.htm
Of course the Scratch race car is built with an aftermarket C3 frame where the OEM "birdcage" subframe is replaced with a roll cage. Note that the tire width is limited to 275 while the car weight is 2600 pounds and the engine power is 360 HP.
The class now has two websites with the additional website representing the direction that the class has been pulled.
http://www.kbhscape.com/racing.htm
http://www.kbhscape.com/racingnote.htm
Of course the Scratch race car is built with an aftermarket C3 frame where the OEM "birdcage" subframe is replaced with a roll cage. Note that the tire width is limited to 275 while the car weight is 2600 pounds and the engine power is 360 HP.
Last edited by B Stead; 08-17-2018 at 06:56 PM.
#2
The websites have been updated.
If the front track width is less than 58.8" and the rear track width is less than 59.6" then particular wheel offsets are not required. There are required wheel and tire widths and diameters.
http://www.kbhscape.com/racing.htm
http://www.kbhscape.com/racingnote.htm
.
If the front track width is less than 58.8" and the rear track width is less than 59.6" then particular wheel offsets are not required. There are required wheel and tire widths and diameters.
http://www.kbhscape.com/racing.htm
http://www.kbhscape.com/racingnote.htm
.
Last edited by B Stead; 08-17-2018 at 07:22 PM.