Koni shock questions...
05-23-2002, 08:21 PM
#1
TECH Regular
Thread Starter
Join Date: Mar 2002
Location: Petaluma, CA
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
Koni shock questions... I'm looking into getting some Koni double adjustable shocks. The question I have is I plan to lower my car with the G2 super springs. Do these shocks need to be re-valved like the Bilsteins or do they work fine on a lowered car? Also I see you have to adjust the shocks from the top. So will I have to take my STB off everytime I want to adjust them? Thanks!
05-23-2002, 09:27 PM
#2
Launching!
Join Date: May 2002
Location: Texas
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Re: Koni shock questions... Not sure about the G2 springs, but I also am looking at getting them. Let us know how the work out.
As for the Koni shocks. If they are like the regular double adjustables, only the rear shocks are adjusted from the top. The second adjustment is below, and done with a screwdriver (or something like that). On the front ones the lower adjustment is the same, but the top must be turned with a tool.. alen wrench maybe. The Strut Tower Brace does not have to come off at all.
As for the Koni shocks. If they are like the regular double adjustables, only the rear shocks are adjusted from the top. The second adjustment is below, and done with a screwdriver (or something like that). On the front ones the lower adjustment is the same, but the top must be turned with a tool.. alen wrench maybe. The Strut Tower Brace does not have to come off at all.