Category: Accessories
Price: $400
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): LA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

LS2 243 Casting heads. 50K miles on these with stock LS2(LS6/3) springs and rockers. Stainless exhaust studs with nuts about 50 miles ago. Ran great on my Jeep for the ~300-500 miles I drove it before I decided I wanted more. Have vids of running if desired. Have been hanging onto these to do something with but selling these and a lot of other parts to get some big-boy heads for the V build.

Stock LS2 everything currently. NGK TR55s are about 50 miles old.

**The only thing wrong with these is one head has a damaged accessory bolt hole. This occurred when the engine was being pulled. Guys I bought it from used a top head hole to pull it(always use a middle hole!!) and some of the threads are missing as you can see in the pic. Simple fix is run it on the passenger side and you never even see it. Bolt still will thread in there and I actually ran it on driver side and my accessories didn't need a mounting spot there. Affects nothing really but I want you to know what you are getting. If this bugs you I can make the same deal for the heads coming off the V in a week. All holes good on those.

$400 Shipped to USA.

I'm not a head shop but know my way around a spring compressor and press and have a lot of parts so if you want something more see below.

Upgrades available:

PSI LS1511ML .625" lift springs stock/steel retainers +$100
PSI LS1511ML .625" lift springs titanium retainers +$200
BTR Platinum .660" lift springs steel retainers +$200
BTR Platinum .660" lift springs titanium retainers +$250
Loaded with bearing trunnion upgraded rockers +$125
Loaded with bushing trunnion upgraded rockers +$135
GM Inconel exhaust valves (8) if you want insurance for boost +$200
LS2 MLS Head Gaskets + $85
LS7 Lifters +$90

All of the above upgrades are NIB save for the PSI springs. Testing time then pulled. These are normally over $200 springs only. All tested on a real-deal spring tester to within published spec of new springs. If we make a deal I would be happy to demonstrate this.

Thanks for looking.

Pics:

 

Pm sent

 

PM replied.

Thank you for your interest!

 

Good morning!

 

SOLD! Thanks Dylan and Tech!

 

Do lifter come with trays ?

 

Sorry bud; the lifters and the heads were sold. The lifters did not in fact include trays but trays are so cheap and are the only thing keeping a lifter from turning sideways. I'd just replace them instead of getting some unknown used pieces. I've had my hands on some old ones that had gotten pretty brittle.

 

You said you were pulling the same heads off your V. If you still want to get rid of those let me know

 

I should have tightened this up. Those were sold as well.

Thank you for your interest.