1984 rx7 5.3L turbo s475/th400/8.8 /E85 (sloppy style)
#507
#510
8 Second Club
iTrader: (13)
What does this thing end up weighing in at? Anything near or under 3k lbs I think it should easily go 8's on anything north of 20PSI on that turbo.
I think the turbo will only make ~28-29PSI on a decent flowing setup, engine will probably take every bit of it. Wastegates are overrated... mine was unplugged for a month and I didn't even notice, other then not being able to run less then 26lbs.
I think the turbo will only make ~28-29PSI on a decent flowing setup, engine will probably take every bit of it. Wastegates are overrated... mine was unplugged for a month and I didn't even notice, other then not being able to run less then 26lbs.
#511
What does this thing end up weighing in at? Anything near or under 3k lbs I think it should easily go 8's on anything north of 20PSI on that turbo.
I think the turbo will only make ~28-29PSI on a decent flowing setup, engine will probably take every bit of it. Wastegates are overrated... mine was unplugged for a month and I didn't even notice, other then not being able to run less then 26lbs.
I think the turbo will only make ~28-29PSI on a decent flowing setup, engine will probably take every bit of it. Wastegates are overrated... mine was unplugged for a month and I didn't even notice, other then not being able to run less then 26lbs.
#512
Yea should be about 2850lbs with me in it.
The suspension really needs work. Its all stock.
And a problem will be launching as i dont have a transbrake but do have antilag and i can build 4psi at launch.
And i live in Arizona, we have shitty air here compared to other places.
Well see what it does on the 21st. I just wana see a 9sec pass or 150mph trap.
The suspension really needs work. Its all stock.
And a problem will be launching as i dont have a transbrake but do have antilag and i can build 4psi at launch.
And i live in Arizona, we have shitty air here compared to other places.
Well see what it does on the 21st. I just wana see a 9sec pass or 150mph trap.
#513
Yea should be about 2850lbs with me in it.
The suspension really needs work. Its all stock.
And a problem will be launching as i dont have a transbrake but do have antilag and i can build 4psi at launch.
And i live in Arizona, we have shitty air here compared to other places.
Well see what it does on the 21st. I just wana see a 9sec pass or 150mph trap.
The suspension really needs work. Its all stock.
And a problem will be launching as i dont have a transbrake but do have antilag and i can build 4psi at launch.
And i live in Arizona, we have shitty air here compared to other places.
Well see what it does on the 21st. I just wana see a 9sec pass or 150mph trap.
#514
8 Second Club
iTrader: (13)
Yea should be about 2850lbs with me in it.
The suspension really needs work. Its all stock.
And a problem will be launching as i dont have a transbrake but do have antilag and i can build 4psi at launch.
And i live in Arizona, we have shitty air here compared to other places.
Well see what it does on the 21st. I just wana see a 9sec pass or 150mph trap.
The suspension really needs work. Its all stock.
And a problem will be launching as i dont have a transbrake but do have antilag and i can build 4psi at launch.
And i live in Arizona, we have shitty air here compared to other places.
Well see what it does on the 21st. I just wana see a 9sec pass or 150mph trap.
I think you'll get it! The Wallace racing calc says 2850lbs only needs about 575hp to crack into the 9's and your well above that!
#520
12 Second Club
iTrader: (5)
Car sounds awesome!
9s for sure as long as you can get it to hook somewhat.
Check this guys thread out. It's a sloppy rotary build.
He's using stock mounting points with a narrowed explorer 8.8. I forget what shocks he's running but they're nothing special at all.
http://www.rx7club.com/rotary-drag-r...t-gen-1015094/
9s for sure as long as you can get it to hook somewhat.
Check this guys thread out. It's a sloppy rotary build.
He's using stock mounting points with a narrowed explorer 8.8. I forget what shocks he's running but they're nothing special at all.
http://www.rx7club.com/rotary-drag-r...t-gen-1015094/