Arctic White Gen4's, Post Up Pictures!!!
#162
Figured I'd share a few updated pictures of the WS6 I bought mid January or so. It's changed a little bit since then.
- 01-02 WS6 wheels
- Widened rear stock wheels to 11" (1" adapter)
- 3/8" longer ARP studs for front wheels with 3/8" spacer
- BMR panhard rod (to center axle to fit the 315's)
- Corsa catback with Dynomax replacement muffler
- QTP cutout wired to convertible top switch
- Smooth bellow
- Embroidered headrests
- 6LE dark gray gauges/HVAC/headlight faces
- BMR springs plus additioinal 1/4" spacers for a 1" drop
- Smooth locks (professional painted to match paint)
- PONTIAC composite rear letters (black)
- White Trans Am overlay on top of black emblems (drew in CAD and cut it out on wife's Silhouette)
- Black overlay on front plate that's slightly smaller to illuminate outline (drew in CAD and cut it out on wife's Silhouette)
- White WS6 emblem overlay (drew in CAD and cut it out on wife's Silhouette)
- Joying JY-UQ130 android 7" screen
- Infinity Reference speakers in doors, sail panels & hatch
- JL 10W0 sub in hatch cubby (Blueday (brother) & I made the box)
- JL 250/1 amp for sub
- White LED backlit gauges, HVAC & headlight
- 100% LED interior & exterior lights
- Illuminated front plate (white phoenix outline)
- Hella 60mm low beam projectors with Morimoto 5500K HID kit
- Figured a way to mount Harley Davidson LED auxiliary lights for my fog lights
- Verret Motorsports tune
Well that list ended up being a lot longer than I expected. There's still some more to come, but at least it's at a point I was happy with it. Last picture is just a Photoshop I end up doing to all vehicles I've owned so I can put it in a frame.
- 01-02 WS6 wheels
- Widened rear stock wheels to 11" (1" adapter)
- 3/8" longer ARP studs for front wheels with 3/8" spacer
- BMR panhard rod (to center axle to fit the 315's)
- Corsa catback with Dynomax replacement muffler
- QTP cutout wired to convertible top switch
- Smooth bellow
- Embroidered headrests
- 6LE dark gray gauges/HVAC/headlight faces
- BMR springs plus additioinal 1/4" spacers for a 1" drop
- Smooth locks (professional painted to match paint)
- PONTIAC composite rear letters (black)
- White Trans Am overlay on top of black emblems (drew in CAD and cut it out on wife's Silhouette)
- Black overlay on front plate that's slightly smaller to illuminate outline (drew in CAD and cut it out on wife's Silhouette)
- White WS6 emblem overlay (drew in CAD and cut it out on wife's Silhouette)
- Joying JY-UQ130 android 7" screen
- Infinity Reference speakers in doors, sail panels & hatch
- JL 10W0 sub in hatch cubby (Blueday (brother) & I made the box)
- JL 250/1 amp for sub
- White LED backlit gauges, HVAC & headlight
- 100% LED interior & exterior lights
- Illuminated front plate (white phoenix outline)
- Hella 60mm low beam projectors with Morimoto 5500K HID kit
- Figured a way to mount Harley Davidson LED auxiliary lights for my fog lights
- Verret Motorsports tune
Well that list ended up being a lot longer than I expected. There's still some more to come, but at least it's at a point I was happy with it. Last picture is just a Photoshop I end up doing to all vehicles I've owned so I can put it in a frame.
#164
Man I really like white on white! I debated for a while if I was going to powdercoat my wheels white when I got them back from being widened, but didn't know if I'd get tired of it. Those Z06 wheels are spot on for your car. What size(s) are you running? How wide out back?
#169
When i put LED front signals and LED tail lights a few months ago, I had to change my flasher. I had a couple EL12's laying around, but also came across a Trick Flasher that I used on my bike. Unfortunately it was a defective one (used replacement on previous 'busa) and only had 1 pattern, but I installed it anyways just to be different. I'm sure who ever is behind me in the turning lane probably gets annoyed having to watch this.
Here's an old video before I changed to LED tail lights.
Here's an old video before I changed to LED tail lights.
#170