pushing limits stock 6.0
#161
TECH Enthusiast
Thread Starter
Can't please everybody. The visor, nudge bar and roof racks are for ***** and giggles. Easy to remove or put back on and cost me peanuts.
Biggest news is dyno is booked for sat week. Going to testmy e85 carb, race carb with roo16 (same as us q16) and a local race fuel blend a mate uses called ets. If we have time and a carb available maybe methanol
Biggest news is dyno is booked for sat week. Going to testmy e85 carb, race carb with roo16 (same as us q16) and a local race fuel blend a mate uses called ets. If we have time and a carb available maybe methanol
#164
TECH Enthusiast
Thread Starter
Cheers bud.
Last time for bottom end assembly. Pistons came out nice after shot peening. Had a little drama during the week when we noticed the tiniest movements on the balancer. We magnafluxed the crank but never checked its straightness. Turns out had a tiny bend in the middle with 3-5thou run-out on the nose. We remachined the mains and it's all mint now.
Last time for bottom end assembly. Pistons came out nice after shot peening. Had a little drama during the week when we noticed the tiniest movements on the balancer. We magnafluxed the crank but never checked its straightness. Turns out had a tiny bend in the middle with 3-5thou run-out on the nose. We remachined the mains and it's all mint now.
#172
TECH Enthusiast
Thread Starter
Not really had to hog them out right on the rail. One issue with ls3 15deg heads . Going to run a smoke machine through engine and see if they leak, otherwise will get those cheap eBay pro-form Chevrolet ones
#173
TECH Enthusiast
Thread Starter
It's alive. Only broke it in and 2 super rich full pulls, still lots to come. 635hp@6800 and 515 ft-lb@6300
https://youtu.be/g8u38k5TxrM
https://youtu.be/mFsvpp-y7Hw
https://youtu.be/ZYrBdfzTuMM
https://youtu.be/g8u38k5TxrM
https://youtu.be/mFsvpp-y7Hw
https://youtu.be/ZYrBdfzTuMM
#178
TECH Enthusiast
Thread Starter
721hp@8000, 511 ftlb@6800
Pump e85, quickfuel 4150 1000cfm custom with 110jets square, slight leak in system so no vac pump, 20w50 break-in oil
Pump e85, quickfuel 4150 1000cfm custom with 110jets square, slight leak in system so no vac pump, 20w50 break-in oil