Ford 9" aluminum third member complete 4.10
09-29-2016, 08:11 PM
#1
Teching In
Thread Starter
Join Date: Sep 2007
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Ford 9" aluminum third member complete 4.10 What's up guys I am selling my third member out of my Ford 9 inch- put it together last year currently has 350 miles on it of easy break in. While I will not say the gears are completely quiet they are much quieter than other set ups I have in the past. It's tolerable with the windows up and the tops on driving on the highway at 75 mph. Still in the car heat it run.. Build list....
strange n1904 case 3.25
powertrax posi 35 spline
Revolution gear 4.10 gears
forged al Daytona support
timkien bearings
solid pinion spacer
.018 pinion shim/.007 bl.
Built with all new parts...I'll get some pics up tomorrow
Changing my setup, looking to get 1000 out of it.
475 298 5551. Jon
strange n1904 case 3.25
powertrax posi 35 spline
Revolution gear 4.10 gears
forged al Daytona support
timkien bearings
solid pinion spacer
.018 pinion shim/.007 bl.
Built with all new parts...I'll get some pics up tomorrow
Changing my setup, looking to get 1000 out of it.
475 298 5551. Jon
10-01-2016, 06:20 AM
#5
Teching In
Thread Starter
Join Date: Sep 2007
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
10-01-2016, 06:28 AM
#6
Teching In
Thread Starter
Join Date: Sep 2007
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
If you notice the different seal it's because I thought it was leaking when in fact it wasn't it was the white lithium grease I packed in the seal oozing out. I changed it anyway.