13thFlame

iTrader: (1)

Looking at running C6 wheels with 305 30 19 tires on the rear of my 1999 Z28. Would they fit with out rubbing or rolling fenders. I know that you need spacers to get the to fit correctly. Is 305 30 19 too wide, what do you guys think? Will they fit well on the car? I'm not lowered currently but I will be in the future. I don't want to rub or get scrapped by the fenders.

chrisdiaz288

These are 285/35/19 I have one spacer for each wheel in the rear stock height as you can see no rubbing on the fenders although even with the spacers There is almost no space between the inside of my wheel tub and the tire

2JAWZ

iTrader: (1)

I have a set of oem C6 Z06 19x12 on rear with a 325-30 tire and Im lowered without any spacers. Took BFH mod but they finally went on with no rubbing. It took a good bit of elbow grease but it paid off.

2JAWZ

iTrader: (1)

19x12's with 325-30's

HotWhipT/A

iTrader: (31)

I have 305/30/19 on my OEM 19x10 C6 wheels. 1.25" spacers, no BFH or rolled fenders and I fit just fine.




Car is not leaning. Just the angle I shot it

Spd-Kilz

iTrader: (35)

You will need to use a spacer and if you lower the car you will need to roll the fenders.

AnotherWs6

iTrader: (17)

Those ******* look huge and are tucked in the wheel well perfectly.