CBM Motorsports 10613 straight thermostat housing
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![](https://cimg8.ibsrv.net/gimg/ls1tech.com-vbulletin/2000x1504/image_cb8ad46e96a9f6cdff6388aad0f9cd0eacc5a599.jpeg)
![](https://cimg9.ibsrv.net/gimg/ls1tech.com-vbulletin/2000x1504/image_dbcc4d0f83cefa1d132a78ba811939dd8021832f.jpeg)
http://store.custombuiltmotors.com/engine-external/cbm-motorsports-ls1-ls2-ls6-ls7-straight-billet-water-neck-fitting-t-stat.html
This was used for barely 200 miles. needed a different angled housing for clearance issues.
Brand new these range from $55-75. Asking for $35
#2
10 Second Club
iTrader: (16)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just bought one of these and I'm curious if you were actually able to use those screws they supply. I wasn't able to becuase they were the wrong thread pitch or something. They got super tight to screw in after only like 2 threads into the block. I could easily tighten the stock bolts by finger all the way down snug before putting the wrench on.
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just bought one of these and I'm curious if you were actually able to use those screws they supply. I wasn't able to becuase they were the wrong thread pitch or something. They got super tight to screw in after only like 2 threads into the block. I could easily tighten the stock bolts by finger all the way down snug before putting the wrench on.