When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
BIGDRAGON, what PN is your brake kit? I was looking to do the Wilwood brakes since it's a direct replacement. I assume no modifications were needed? Thanks
[QUOTE=t_raven;19308108]It took me 7 years to decide on a wheel I think would look good on my 01 TA. I hate that 95% of the cars on here either have some Vette wheel, CCWs, Fikses, and the occational TTIIs.
I ordered some forgelines a couple months ago. They finally shipped them and sent some pics. I won't be home to put them on until August. Waiting sucks.
They are SO3Ps, 18x10.5 +56 all around, and I'll be putting 295/35/18 Nitto Invos on them. I wasn't home to measure for fitment, but after a lot of reading on here, I found a few guys that are running Vette wheels in that size and offset on all 4 corners. I was tempted to get them with a deeper lip in the rear and narrow the axle I'm building for it, but I decided to keep a "square" set up so I can rotate them, and if I ever sell them, they'll fit any 4th gen with a stock axle. So I hope they fit and I don't have to send them back to be re-hooped lol.
I'll report back when they are on the car. They turned out better than I expected. These are mine, not a stock photo.
That explains it, I wish they still made those in our bolt pattern. I'm sure you are very attached to them after owning them for so long, but if you ever want to get rid of them let me know
That explains it, I wish they still made those in our bolt pattern. I'm sure you are very attached to them after owning them for so long, but if you ever want to get rid of them let me know
Won't the bmw bolt pattern work on fcars?
I probably won't be getting rid of them. They are a super high quality wheel abd they only weigh about 18lb each. Which is pretty good for a 18x9.5