Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

200+ shot fuel pump setups?

Thread Tools
 
Search this Thread
 
Old 12-15-2016, 09:24 PM
  #21  
TECH Addict
iTrader: (66)
 
blk00ss's Avatar
 
Join Date: Feb 2007
Location: Jasper, AL
Posts: 2,366
Likes: 0
Received 5 Likes on 5 Posts

Default

12.1-12.3
Old 12-18-2016, 06:27 PM
  #22  
9 Second Club
iTrader: (9)
 
Bowtiedford's Avatar
 
Join Date: Apr 2011
Location: Indian Rocks Beach Fl
Posts: 1,059
Likes: 0
Received 0 Likes on 0 Posts
Default

have to know your fuel pressure, especially after you hit it and see how it catches up. High pressure at least if your off a few pounds in psi isn't as critical as in low pressure. 1 to 2 pnd is a good swing in jetting while in high pressure as much as 5 pounds swing can still be safe as long as your not on the edge. Smart to stay with Nitrous outlet jetting chart till you I have a grip on what pressure your at.
Old 12-18-2016, 06:28 PM
  #23  
9 Second Club
iTrader: (9)
 
Bowtiedford's Avatar
 
Join Date: Apr 2011
Location: Indian Rocks Beach Fl
Posts: 1,059
Likes: 0
Received 0 Likes on 0 Posts
Default

stand alone is a safe bet. I run X16 in my stand alone
Old 01-01-2017, 12:13 AM
  #24  
On The Tree
 
Jarred Hodges's Avatar
 
Join Date: Aug 2011
Location: dora al
Posts: 157
Likes: 0
Received 0 Likes on 0 Posts
Default

I also ran a stand alone, 1 gallon cell, holley blue and a regulator with a fpss. On any high hp car that you plan to spray a separate fuel system in just cheap insurance. I think my entire sutup cost around $400 to buy
Old 01-12-2017, 06:38 AM
  #25  
Launching!
Thread Starter
iTrader: (4)
 
98z28jorge's Avatar
 
Join Date: May 2009
Posts: 264
Received 0 Likes on 0 Posts

Default

Well guys quick update I just went ahead and upgraded my hole fuel system should be good now with room to grow here are some pics



Old 01-12-2017, 11:57 PM
  #26  
TECH Resident
iTrader: (2)
 
baronsmith98's Avatar
 
Join Date: Feb 2013
Location: Brunswick, GA
Posts: 831
Likes: 0
Received 0 Likes on 0 Posts
Default

I like the sump on the gas tank. If I launch with anything less than 1/2 a tanks it starves the pump and the engine noses over.
Old 08-29-2019, 08:11 PM
  #27  
Registered User
 
Seth Abbott's Avatar
 
Join Date: Aug 2019
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Stand alone fuel pressure

What’s your fuel pressure running to your solenoids or too atleast one kit? Thanks
Originally Posted by ZackMorris
I wouldnt run over 175 off the rail.

Grab a 1gal RCI cell + FPR, throw a pump in or on it, and then have a cheap dedicated fuel system for C16.

I'm using this setup for two kits, 350-400hp of spray, with no fuel issues.

Old 08-30-2019, 09:23 AM
  #28  
TECH Junkie
 
MaroonMonsterLS1's Avatar
 
Join Date: Dec 2012
Location: Iowa
Posts: 3,573
Received 1,249 Likes on 802 Posts

Default

first post on a new account...revives 2 year old thread...come on bub
The following users liked this post:
brandon@nitrousoutlet (08-30-2019)



Quick Reply: 200+ shot fuel pump setups?



All times are GMT -5. The time now is 02:46 AM.