nickp

iTrader: (2)

Hey, I picked up a nitrous express direct port kit for my Lt1 firebird. I am looking for tips and advice for installing the nozzles, more specifically the location for the nozzles. The only reason I am concerned is, just by looking at everything, it appears the nozzles are going to be sticking under my fuel injectors, and I don't want to disrupt the fuel injector flow path anymore than I have to. Thanks.

brandon@nitrousoutlet

iTrader: (2)

This is an example of one we have plumbed in the past. We used straight blow through nozzles and welded nozzle bungs in. the nozzle bungs move the nozzle out of the way of the injector.

nickp

iTrader: (2)

Damn! Very nice work!

Atl_monte

iTrader: (2)

where did you get the bungs from?

brandon@nitrousoutlet

iTrader: (2)

Direct Port Nozzle Bungs

We sell these.

Skizzy

iTrader: (6)

You can also install a traditional Piranha nozzle on the intake without getting in the way of the injectors. Below is a pic i found from searching around.