redtan

iTrader: (5)

Last summer I built an engine for my road race car with all brand new parts and built to take the abuse. However I did not take so much into consideration the oiling necessary for an LS engine in this environment and ended up spinning a bearing. This made me decide to get out of the LS game for now so up for sale is the shortblock, heads and cam from said car.

All parts were purchased brand new in the summer of 2015 (have receipts) and have less than 2,000 miles on them. The shortblock however was taken back to the engine shop that built it and had them take it ALL apart, inspect, clean, perform any necessary machine work and assemble back with all new bearings and rings. So essentially it's a brand new forged engine.

Details (located in eastern Massachusetts, can meet to deliver in the area).

GM aluminum LS2 block
Mahle 4.005 forged pistons with their powerpack rings
Scat forged steel I beam rods with ARP bolts
ARP main studs
OEM GM crank 24x

Engine is sitting sealed in the bag as it came from the builder, fresh coating of oil on all parts and with assembly lube.

Cam is a cammotion core 226/230 114+3 with 595/585 lift on their proprietary lobes.

Prices: $3000 for the shortblock $300 for the cam.

Pics:

redtan

iTrader: (5)

Bump.

redtan

iTrader: (5)

Bump, priced lowered.

redtan

iTrader: (5)

Bump, priced reduced.