When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well I know you said NO Spool but heres what I got anyhow...
Strange Engineering HD 12 Bolt
*Upgraded STRANGE Housing.. "Ford Big Ends" Welded Tube's
*Bearing Cap Stud kit
*Strange Engineering 33 Spline Axles
*Strange HD Steel Spool
*Richmond 4.56 Gear Set
*Upgraded Strange Chromoly Pinion Yoke with HD Straps,Studs... 1350 U-Joint
*Strange Engineering 11" GM Drum Brake Kit
*ARP 2x5/8" Wheel Studs
*LCA Relocation Brackets
*Pre Ran Brake Lines...
*Adj Shock Mounting Location...Or Coil Over
Also comes with
*Tubular Aftermarket Double Adjustable Torque Arm & Strange's 12Bolt Mounting Bracket w/Hardware
*Strange Engineering 3.5" HD Chromoly Drive Shaft with Upgraded Yoke & 1350 U-Joints (Will Fit Standard F-Body Transmission...T56/4L60e/700R4/T5
Third Gen Axle Housing Width
Used for a couple season's in a LS1 4th gen
1.5" Shorter PER SIDE than standard 4th gen width
Well I know you said NO Spool but heres what I got anyhow...
Strange Engineering HD 12 Bolt
*Upgraded STRANGE Housing.. "Ford Big Ends" Welded Tube's
*Bearing Cap Stud kit
*Strange Engineering 33 Spline Axles
*Strange HD Steel Spool
*Richmond 4.56 Gear Set
*Upgraded Strange Chromoly Pinion Yoke with HD Straps,Studs... 1350 U-Joint
*Strange Engineering 11" GM Drum Brake Kit
*ARP 2x5/8" Wheel Studs
*LCA Relocation Brackets
*Pre Ran Brake Lines...
*Adj Shock Mounting Location...Or Coil Over
Also comes with
*Tubular Aftermarket Double Adjustable Torque Arm & Strange's 12Bolt Mounting Bracket w/Hardware
*Strange Engineering 3.5" HD Chromoly Drive Shaft with Upgraded Yoke & 1350 U-Joints (Will Fit Standard F-Body Transmission...T56/4L60e/700R4/T5
Third Gen Axle Housing Width
Used for a couple season's in a LS1 4th gen
1.5" Shorter PER SIDE than standard 4th gen width
I have a moser 12 bolt for sale as well. doesnt meet your criteria though. Rear is complete with a BMR adjustable torque arm, LCA's, and an aftermarket sway bar. Rear is complete with stock disc brakes as well. no TCS or reluctor rings. has 3 channel brake lines on it. has an eaton diff with 3.73 gears an a TA Performance Diff Cover.