Mounting plate Issue
#1
Mounting plate Issue
I just purchased Brians Hurst kit and upon installation I noticed the mounting plate had a small crack in it. Didn't think much of it so I continued with the short throw swap. The install was very straight forward and the detailed write up from Brain was awesome.
However after assembling the system and shifting from first to second, the whole plate fell apart!
This plate does not look very sturdy in the first place and considering how much movement is inside, is there a sturdier aftermarket set up? I couldn't find anything online so I figured id ask here.
However after assembling the system and shifting from first to second, the whole plate fell apart!
This plate does not look very sturdy in the first place and considering how much movement is inside, is there a sturdier aftermarket set up? I couldn't find anything online so I figured id ask here.
#2
TECH Addict
iTrader: (19)
Join Date: Aug 2007
Location: Where the Navy tells me to go
Posts: 2,403
Received 106 Likes
on
88 Posts
However after assembling the system and shifting from first to second, the whole plate fell apart!
This plate does not look very sturdy in the first place and considering how much movement is inside, is there a sturdier aftermarket set up? I couldn't find anything online so I figured id ask here.
This plate does not look very sturdy in the first place and considering how much movement is inside, is there a sturdier aftermarket set up? I couldn't find anything online so I figured id ask here.
#3
Nevertheless, Thanks!