Dimeomboost

What do you think of my intercooler pipe layout I was hoping it would look better more professional maybe. Any opinions or critiques welcome. No clamps yet there in the mail so I know there missing but if I change it it's easier without clamp to undo

roastin240

iTrader: (13)

Looks decent in my opinion. Did you consider a center outlet tank on top and going up and over? Probably not enough hood and radiator clearance I am guessing?

I would shorten the plumbing on drivers side feed, and lengthen equal amount of the other 2...this would center the intercooler core at least and probably look better.

Dimeomboost

Before I read your reply I went ahead and made some.changes to it and here's the now I like it better

Cyrperformance

iTrader: (1)

It looks good. Just make sure there is plenty of opening in front of cooler for airflow.

stevieturbo

If it works for you, it works for you. Simple as.

Keep coupler connections to a minimum though if you can, just from a practical point of view. Less failure points.

svslow

I took a slightly different approach and used a smaller radiator so the inter cooler outlet would have to make such a long trip.