alumastars, Custom Martin Smallwood Performance Cam, springs, etc..
#1
11 Second Club
Thread Starter
iTrader: (24)
Join Date: Nov 2003
Location: Chitown, IL
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
alumastars, Custom Martin Smallwood Performance Cam, springs, etc..
Category: Accessories
Price: $1
Location (State): AL
Item Condition: Brand New
LS Engine?: Fits LS Engine
Spec'ed for a 427" twin turbo setup. Specs are: 252/256 .750/.720 117+5. It's brand new, never used. I did slide it into the motor, but it never was fired. I have since changed the setup, so switching up the cam. This is a 3 bolt ls setup. $250
============================================
A pair of exhaust trim rings made of carbon fiber. Hole size looks to be around 4-3/4". Some minor scratches from laying around. $40.00
===========================================
Weld Racing AlumaStar 2.0 Polished Wheels part # 788-510276. Excellent cond. never drilled for screws. comes with metal valve stems. Would look as good as new with a little polish.
15x10. 3" Backspacing. 4.75 bolt pattern. $600
===========================================
Drysump oil pan. $150
==========================================
injector bungs to setup dual injectors. $40
========================================
PAC 1324 springs, used. Only switching because I needed bigger. $180
Specifications
Part# PAC-1324
Dual Drag Race Spring - Bracket / High Lift applications
Mass (g) 152.0
Outer Spring I.D. (in) 1.175
Outer Spring O.D. (in) 1.625
Middle Spring I.D. (in) N/A
Inside Spring I.D. (in) 0.851
Install Load (LB) 275
Install Height (in) 2.000
Open Load (LB) 810
Open Height (in) 1.150
Coil Bind Max (in) 1.100
Lift Max (in) 0.850
Last edited by 4bangermustang; 11-28-2017 at 09:24 AM.