Custom Grille emblem





Custom Onyx stainless lettering



Onyx custom emblem with carbon fiber.

Have not posted in a little bit.. so I though t I would put three parts up here.

 

Lets just say Switchplates

 

Stainless steel engine bay labels.
Available in Mirror finish...
Brushed finish....
Or black mirror finish.

 

Stop I can't afford all this.

Also, I have a set of 5th gen style Z28 badges that I bought in July of 2015. I recently ordered two more (one was damaged in a sideswipe). The side ones were flawless but the rear one started coming off of the base (I'm assuming it's because the rear of the car has a slight curve to it). Is there a way to make sure it doesn't happen again with the new badge?

 

Per my email instructions, you need to make sure the parts shape matches the curvature of the vehicle where you want to place it.
this is something that needs to be done by the customers, because we do not know where parts will be placed, and even on the back of this car the curvature changes the farther fro m the center you go.
So once you select a location, a very slight adjustment by hand might be needed prior to adhesion.

 

Thank you so much!!!!

 

I might get some flak for this but I've kind of always wanted a custom RPO sheet in stainless. I'd have to come up with some of the RPO's though as I'd like it to apply to the cars current state rather than its v6 auto w68 call out. Car is practically a 1of1 at this point

 

You are welcome. Sorry for the late reply. we have been very busy here.

 

Please let me know when you are sure of what you need.
Should not be any problem doing it.

Thanks, Roger

 

Will do Roger, I'm gonna have to make up a few rpo's haha

 

Think I will post some custom stuff for a while.



This one is am emblem not a decal, with custom text in the bottom.

 

Here is a custom panel roger did for me. It is the window and side mirror switch panel going in my dads 68 camaro. It is a 4th gen console and the panel is in the area where the ebrake handle would be.

 

Black mirror badging

 

I have a question above it the 5h gen Z28 emblem, would it cover over the whole space once I remove my Z28 emblems.
I'm afraid of what I'll find once I remove them, but want to upgrade to something different

 

How much for this one?

 

Do you still do the vin cover plates?

 

The 5th gen style Z28 parts we make are slightly longer than the 4th gen emblems. SO that should be ok, but I can resize them.

There should be no issues removing your stock parts. What is behind them is just clearcoat and paint. The fishing line trick works nice and fast.

Please let me know

 

Yes we still make those.
Please let me know.

 

Those are $64.99. completely customizable.

 

Hi, my wife has an 05 S197 Mustang GT with a roush supercharger, looking for ideas for supercharged emblems, what could you do for me please and also colour options, thanks colin.