When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Cut the end tank out of the IC, and squared a 4" pipe to fit the edge of the tank instead of having this plate wit a pipe welded into the center of it. Should help with flow!
Progress slowed some, had a rough go of it with daily drivers the last two weeks. My 03 cummins shelled something in the trans Friday, Saturday we went on a 6 hour trip to the see the big zoo, lost 3-4 (gasp wut) in the 60e on my wife's avalanche. Drove 3 hours home in 2nd gear @4500 rpm. Wife stRted driving the tdi Jetta Monday and Tuesday the radiator exploded. So what and the hell! Spent today doing some osha approved activities involving on of my rollover Tahoe part outs.
Got a vasectomy Friday, tried to be productive in the house. Built my fuse block, rows of 6 is 12v switched, row of 2 is 12v constant. I have another set of fastronix relays to mount in the trunk for the fuel pumps. Bought a ton of real nice wire loom, going to try and keep the engine bay super clean. Pcm, fuses etc all under dash, car will also have cruise control going to mount the cruise module under the dash and hook it to the gas pedal, hopefully.
also, ordered an undercover innovations firewall shave kit, to clean things up.
after that surgery I wasn't keen on doing anything, but I gotta get this crap done. So this was the easiest route lol. For the safety peeps, it's anchored thru the a pillars with two g70 chains to a 4x4 tractor on the other side. But, it's happily laying on its side anyways lol.
Subscribing, I"m doing a '67 Camaro. Inner fenders are gone but it has bay bars.
What's the consensus on those intercoolers?
im not sure, I can take core measurements on it, it has a part number on it I think. It's massive
Originally Posted by Hellsx
Im crushing my teeth just thinking of this!!!!! Its a thing id LIKE to get done, but i CANT have anyone play neer that zone with scizors....
Ouch!!!
Well I sure felt the same, but the wife was going to have it done or me, and I've heard that women tend to gain weight when they have it done, and we can't have that now can we
my undercover innovations firewall shave plate came in! Can't wait to get started with that.
Here is the culprit if my shelled trans and tcase. Did the shift improved hd2 kit with improved pwm on the replacement, along with switching to hytrans. Curious to see how it holds up.
Ordered my complete fuel system last night, already had the pumps. Twin 044 pumps, second pump on a hobbs switch. 8an to each pump, 8an from a each pump, y right after pumps to 10an, then y back to 8an at the back of each rail, etc.