00ssSixspeed

I thought about painting the mirrors too. But I think it would be too much. Maybe change my mind later...lol

Sike-o

I started this past Saturday trying to remove my factory exhaust manifolds. Hardest thing I've ever done! And I'm not trying to brag but I've done a lot. My car has 63000 miles on it and had been garage kept it's entire life but dang if the entire exhaust isn't rusted solid. The passenger side came off pretty well but the driver side was a different story. The very back header bolt was rusted solid and would not turn. I ended up with a rounded off bolt in a really hard to reach place. I pb blasted it, tried a bolt extractor socket, took the cat off that side so I could try from the bottom; all with no luck. I tried to put some vice grips on it but there just wasn't enough space. I just kept soaking it in pb blaster and let it sit and then sprayed more pb and repeat. After 2 whole days, I finally got that stupid bolt to rotate with a simple wrench. Crazy! You wouldn't believe how happy that made me! Let's just say if you could hear me, I'd be slurring because I've had a few celebratory beers! Hey, it's almost independence day and I'm American!

Crf450r420

iTrader: (1)

Finished removing the failure of Holley DBW and put in a cable controlled FAST 92mm throttle body. Got it running just in time to do a few open header revs while neighbor was launching a small city's 4th of July firework display in the back yard.

00ssSixspeed

Put on front grille red camaro emblem.

Doug G

Worked on figuring out how to mount my alternator with the new electric WP....

capelajc

Cleaned it all before taking it out for a Sunday ride after getting it back from h/c , LS6 intake,LT's , tranny rebuild, circle D billet TC, tune and fresh Nitto G2's!

Game ova

I did this to mine....

MIDNITE Z

iTrader: (1)

Flushed the coolant and replaced coolant level sensor

NewOldSchool

I organized the loose parts on my '68 basket case project to see what parts the seller (a friend) needs to look for in his shop, like ALL the nuts, bolts, & screws he collected when he disassembled it. He's looking, LOL....

Doug G

Was Saturday....but....hit the strip and ran :drumroll:

by https://www.flickr.com/photos/123907483@N04/, on Flickr

by https://www.flickr.com/photos/123907483@N04/, on Flickr

Mikey SS

Ordered exhaust

TechCam97

iTrader: (5)

Finished up my power steering install on my 67 Camaro. Love it! So much better than manual steering!



After bleeding everything and then taking it around the block for a while and topping it all off, I brought it home and washed it.

jimmyp3353

iTrader: (3)

Out with the old and in with the new. (don't know why the pictures came out sideways LOL)

dojob

Attachment 718910

LINE'EM UP

Please post a vid when you get it installed.

Mikey SS

Goldendoodle? The is no shot mine would ever stay like that He would have dove into the bucket already

dojob

Yea. F1B. He's real calm and just hangs around

Majestic9C1

iTrader: (19)

took apart the T-tops to put some RTV and install better seals ( hopefully wont leak)

also installed new Koni Strt shocks on the rear as well...


redoing the front suspension is for another weekend

Mikey SS

Honestly opened the box and thought this is going to suck without a lift . Brought it my buddies house who has a lift and put it on while I was at work. He welded some of it so it doesn't move too which is good because I have no clue how to weld.

Mikey SS

Installed a shifter the other night