When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Category: Racing Parts Price: $125 Location (State): MD Item Condition: Brand New Engine: LS2/LS3/LS7/L92/LS9 LS Engine?: Fits LS Engine
Top of the line Manton Series 5 set of 16; pushrods 3/8 inch diameter x .95 wall and 7.96 inches long as you would measure with a caliper so this counts for the holes and squareish tip taking out about .050 (If the ends were full ***** (no holes) it would be just over 8 inches). Have about 10,000 miles on them (GM LS motor) in good shape in a street car with about 450 pounds open pressure. Changing out as I am changing lifters. New shipped these are $275. These pushrods fit the link bar style lifters like Johnson when the ball height of the lifter is 2.42 inches or so and the factory LS7 rocker arm. The factory lifter is a little taller at 2.60 inches ball height thus that is why these lifters are longer than the stock 7.8 inch LS7 pushrods.
08-10-2017, 04:56 PM
Manton Stage 5 Pushrods 3/8 x 7.96 inches 
