When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Got my strange chromoly driveshaft and sonnax chromoly slip yoke on the way, also ordered a 40,000gvw true cool trans cooler, and all the fittings and line to run 8an from the trans to the cooler. Also made some changes to my fuel system, adding in a wiz spin on filter setup.
These lovely gems showed up today, time to get this party started.
New pistons, pins and rings arrived, and my radiator catch can.
Question. Would it be better to feed a hose down to the bottom of the catch can and vent the top, or run the hose to the top and put the drain petcock on the bottom? I can do either.
Do you want it to be a catch can, or a coolant recovery can.
Does the top fitting have a tube that goes to the bottom
If catch can, hose to the top so you can drain it
If coolant recovery, hose to the bottom, so when the engine cools it will draw water back into the rad-as long as there is a vent hole
Think a strange chromoly 3" shaft with 1350 joints would be strong enough for this?
I have a brand new one thats too short for my app. 48.5 between the ears if its of any help? Trying to unload it to get the right lenght. Moly, billet ends, spicer U Joints, pretty much indestructible.
Lemme know!
Edit.... anwsering before having read it all. I just finished and saw you have one coming lol!!!