93 Z28 project
#63
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: May 2014
Location: Lexington, S.C.
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
My next victim
Old bushing
Pulling old bushing
Had to put helicoils in all the idler bracket bolt holes
Good picture of the 1/2" spacer i made.
I always fill from here. Much easier.
Old bushing
Pulling old bushing
Had to put helicoils in all the idler bracket bolt holes
Good picture of the 1/2" spacer i made.
I always fill from here. Much easier.
#66
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: May 2014
Location: Lexington, S.C.
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
A couple videos of the car. I just recently wired the SLP line lock and manual fan switch. Car has been sitting the past couple of weeks. It needs new rear tires and I believe a slave cylinder. I have to keep refilling the clutch reservoir and recently my clutch has started chirping when taking off from a stop.