Drag Racing Tech
Sponsored by:
Sponsored by:

VIKING DOUBLE ADJUSTABLE SHOCKS ON 160+mph fbody

Thread Tools
 
Search this Thread
 
Old 10-19-2017 | 10:49 AM
  #41  
Dynospeed's Avatar
Launching!
10 Year Member
iTrader: (3)
 
Joined: Aug 2011
Posts: 279
Likes: 1
Default

I stay super impressed with the Vikings especially the Cruisader valving. My F body goes 1.155-1.16 on 235/60/15 @ 3090lbs. They worked better than the revalved Menscers I had.
Old 10-19-2017 | 12:37 PM
  #42  
BlackSS4thgen's Avatar
Thread Starter
TECH Fanatic
5 Year Member
 
Joined: Dec 2015
Posts: 1,689
Likes: 461
From: Gaylord Michigan
Default

Originally Posted by Dynospeed
I stay super impressed with the Vikings especially the Cruisader valving. My F body goes 1.155-1.16 on 235/60/15 @ 3090lbs. They worked better than the revalved Menscers I had.
I have always had good success with them on other cars. My buddy has an 800whp fox that is pretty light but cuts 1.1xs

I am 100% it is my suspension tuning skills.

I have changed ride height and added weight here and there without doing too much extra attention to the all around measurments.

That is badass man! IF you have any special ideas or tips I am all ears! Id absolutely love to get this car sub 1.2's
Old 10-19-2017 | 12:42 PM
  #43  
sillysspeed's Avatar
TECH Resident
iTrader: (21)
 
Joined: Sep 2009
Posts: 766
Likes: 0
From: MD
Default

Very impressive ^^^

I have the standard Viking's and have been 1.32 60ft with 410rwhp. Around 475rwhp now and have been a bunch of 1.30's and hopefully high 1.2x's in cooler air. Rode a 18" wheelie out about 40ft on the streets of mexico also
Old 10-22-2017 | 12:37 AM
  #44  
BlackSS4thgen's Avatar
Thread Starter
TECH Fanatic
5 Year Member
 
Joined: Dec 2015
Posts: 1,689
Likes: 461
From: Gaylord Michigan
Default

I made 26 1/8th mile hits and 6 1/4 hits this week. I tried everything under the sun that people have suggested to me. Either I still suck. Or as suspected these vikings need replaced. Not only for the lack of ability. But possibly wear. I have had them on the car for 2 years. Probably 6,000 miles on the street. 100-120 passes? They dont seem to hold under rebound settings as well as they used to. For instance when I puch the car down in the rear the car responds nearly instantly. It used to hold down for several moments with a higher Rebound setting. Anywho. IT is that time of year for me up here in michigan. I went out with a bang and just found a happy median. The car runs real well down the track now at the least.




Old 10-22-2017 | 07:54 PM
  #45  
Fishmasterdan's Avatar
TECH Apprentice
 
Joined: Oct 2015
Posts: 310
Likes: 24
Default

Not real sure if I caught the radial or bias play. I finally threw my radials in the trash. Track prep has to be perfect for those to work. Went to bias plys and haven't had any issues. Rears are 4 back from full tight c and 9 back from ft on the rebound. Can't push the rear down by hand it's to stiff.
Old 10-22-2017 | 07:58 PM
  #46  
BlackSS4thgen's Avatar
Thread Starter
TECH Fanatic
5 Year Member
 
Joined: Dec 2015
Posts: 1,689
Likes: 461
From: Gaylord Michigan
Default


Originally Posted by Fishmasterdan
Not real sure if I caught the radial or bias play. I finally threw my radials in the trash. Track prep has to be perfect for those to work. Went to bias plys and haven't had any issues. Rears are 4 back from full tight c and 9 back from ft on the rebound. Can't push the rear down by hand it's to stiff.
Bias 28x10"
Old 10-22-2017 | 08:09 PM
  #47  
Fishmasterdan's Avatar
TECH Apprentice
 
Joined: Oct 2015
Posts: 310
Likes: 24
Default

Pressure? 12.5 I would spin a tiny bit 11 it hooks every time.
Old 10-22-2017 | 08:11 PM
  #48  
Fishmasterdan's Avatar
TECH Apprentice
 
Joined: Oct 2015
Posts: 310
Likes: 24
Default

Originally Posted by Fishmasterdan
Pressure? 12.5 I would spin a tiny bit 11 it hooks every time.
O ya anything lower than 11 gets it little sketchy.
Old 10-22-2017 | 08:16 PM
  #49  
blk00ss's Avatar
TECH Addict
iTrader: (66)
 
Joined: Feb 2007
Posts: 2,366
Likes: 5
From: Jasper, AL
Default

How many passes on those slicks? And are they stiffwall?
Old 10-22-2017 | 08:18 PM
  #50  
BlackSS4thgen's Avatar
Thread Starter
TECH Fanatic
5 Year Member
 
Joined: Dec 2015
Posts: 1,689
Likes: 461
From: Gaylord Michigan
Default

Originally Posted by Fishmasterdan
O ya anything lower than 11 gets it little sketchy.
I tried 8-15. 13/14 was the 8.34 pass but I rolled into it. 8 psi at the 1/8th track was the best.
Old 10-22-2017 | 08:20 PM
  #51  
BlackSS4thgen's Avatar
Thread Starter
TECH Fanatic
5 Year Member
 
Joined: Dec 2015
Posts: 1,689
Likes: 461
From: Gaylord Michigan
Default

Old 10-22-2017 | 08:22 PM
  #52  
BlackSS4thgen's Avatar
Thread Starter
TECH Fanatic
5 Year Member
 
Joined: Dec 2015
Posts: 1,689
Likes: 461
From: Gaylord Michigan
Default



Old 10-22-2017 | 08:28 PM
  #53  
BlackSS4thgen's Avatar
Thread Starter
TECH Fanatic
5 Year Member
 
Joined: Dec 2015
Posts: 1,689
Likes: 461
From: Gaylord Michigan
Default

Originally Posted by blk00ss
How many passes on those slicks? And are they stiffwall?
Yes, stiff wall. 32 passes in the last 7 days. Maybe 15 before then? It hasnt worked an ounce since I turned up the boost. Made one wastegate pass to an 8.89@154 1.33 60 leaving on 5 psi. Its 100% gotta be the car. Im going to raise it up more and do a set of afcos. Put a radial back on it. Unfortunately it is winter time and I am out of time for the year. I have some stuff around my house and shop to get taken care of before it snows or else id try more.
probably 2-3 more track days left this year.
Old 11-06-2017 | 07:27 PM
  #54  
BlackSS4thgen's Avatar
Thread Starter
TECH Fanatic
5 Year Member
 
Joined: Dec 2015
Posts: 1,689
Likes: 461
From: Gaylord Michigan
Default

Originally Posted by Dynospeed
I stay super impressed with the Vikings especially the Cruisader valving. My F body goes 1.155-1.16 on 235/60/15 @ 3090lbs. They worked better than the revalved Menscers I had.
The crusaders are on the car in your sig with the 440ci?
All 4 corners?
I keep coming back to them because I really dont want to drop 2-2,300 in shocks on the car.

I know Justin Jordan is going 4.70s@154 in a 3,400 pound 12 mustang. 7.3@190+ He loves the crusaders.

The only thing that makes me debate is so many of the fast fbody guys use the afco/menscers.
Old 11-06-2017 | 09:53 PM
  #55  
Only ERO's's Avatar
TECH Resident
iTrader: (19)
 
Joined: Apr 2007
Posts: 843
Likes: 69
From: Rochester, MN
Default

Originally Posted by BlackSS4thgen
The crusaders are on the car in your sig with the 440ci?
All 4 corners?
I keep coming back to them because I really dont want to drop 2-2,300 in shocks on the car.

I know Justin Jordan is going 4.70s@154 in a 3,400 pound 12 mustang. 7.3@190+ He loves the crusaders.

The only thing that makes me debate is so many of the fast fbody guys use the afco/menscers.
Subscribe to Menscers Facebook page and keep an eye out. I bought a set on the scratch and dent sale. I was just going to buy Fronts, but couldn't say no. Paid $1600 for all 4. Sold my Vikings and offset that to about $800-900.
Old 11-06-2017 | 10:49 PM
  #56  
BlackSS4thgen's Avatar
Thread Starter
TECH Fanatic
5 Year Member
 
Joined: Dec 2015
Posts: 1,689
Likes: 461
From: Gaylord Michigan
Default

Originally Posted by Only ERO's
Subscribe to Menscers Facebook page and keep an eye out. I bought a set on the scratch and dent sale. I was just going to buy Fronts, but couldn't say no. Paid $1600 for all 4. Sold my Vikings and offset that to about $800-900.
Oh boy. That is awesome!! I appreciate it. I will do that!
Old 11-14-2017 | 12:42 PM
  #57  
BMR Sales2's Avatar
LS1Tech Premium Sponsor
iTrader: (40)
 
Joined: Nov 2008
Posts: 3,451
Likes: 17
From: Seffner, FL
Default

Originally Posted by BlackSS4thgen
The crusaders are on the car in your sig with the 440ci?
All 4 corners?
I keep coming back to them because I really dont want to drop 2-2,300 in shocks on the car.

I know Justin Jordan is going 4.70s@154 in a 3,400 pound 12 mustang. 7.3@190+ He loves the crusaders.

The only thing that makes me debate is so many of the fast fbody guys use the afco/menscers.
Just thought I'd mention too that JPC just went 6.99 @200 (4.51 1/8 mile) on a set of Viking Crusaders as well in combination with our off the shelf components
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302


Find a Quality alignment shop near you!
Old 11-15-2017 | 10:55 AM
  #58  
BlackSS4thgen's Avatar
Thread Starter
TECH Fanatic
5 Year Member
 
Joined: Dec 2015
Posts: 1,689
Likes: 461
From: Gaylord Michigan
Default

Originally Posted by BMR Sales2
Just thought I'd mention too that JPC just went 6.99 @200 (4.51 1/8 mile) on a set of Viking Crusaders as well in combination with our off the shelf components
Yea they are riding. Mid 1.16 ish 60's.
I think most fbody guys skip right by the crusader valving. The menscers are definitely the go to on the fbodies. I was going to try crusaders but ended up catching the menscers on sale last week there.
Old 11-15-2017 | 03:01 PM
  #59  
BMR Sales2's Avatar
LS1Tech Premium Sponsor
iTrader: (40)
 
Joined: Nov 2008
Posts: 3,451
Likes: 17
From: Seffner, FL
Default

That is something I am quickly coming to realize is many people simply don't know about the Crusader valving option. They work, and aren't terribly expensive. Only about $150 more per pair than the standard Warriors
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302


Find a Quality alignment shop near you!
Old 11-15-2017 | 11:03 PM
  #60  
BlackSS4thgen's Avatar
Thread Starter
TECH Fanatic
5 Year Member
 
Joined: Dec 2015
Posts: 1,689
Likes: 461
From: Gaylord Michigan
Default

Originally Posted by BMR Sales2
That is something I am quickly coming to realize is many people simply don't know about the Crusader valving option. They work, and aren't terribly expensive. Only about $150 more per pair than the standard Warriors
I didnt know about them either. I was still in Ocala at Speedline when I bought them two years ago. I set the dealer account up and they even recommended the warriors to me!


Quick Reply: VIKING DOUBLE ADJUSTABLE SHOCKS ON 160+mph fbody



All times are GMT -5. The time now is 02:29 AM.