RX Catch Can Routing Help
#1
Thread Starter
TECH Regular
iTrader: (21)
Joined: Oct 2005
Posts: 479
Likes: 0
From: Santa Barbara, California
RX Catch Can Routing Help
Hey everyone. Bought an RX catch can and am working on my setup. Read through a ton of posts and came across this diagram which resonated most to me, but now I'm trying to adapt this to work with the 3 port RX catch can and clean side separator. Can anyone help revising a diagram that works with this can/clean side separator?
This is on an 02 SS, stock motor, STS rear mount T70 turbo.
This is on an 02 SS, stock motor, STS rear mount T70 turbo.
#3
Here’s McNally’s diagram.
This is what I did with mine but i didn’t get the separator.
-barb from the passenger side valve cover to the air filter.
-barb off the throttle body that sees boost/vac to “A”.
-“B” on catch can went to drivers side valve cover.
-“C” is plugged for right now until I can get another source to draw vacuum.
This is what I did with mine but i didn’t get the separator.
-barb from the passenger side valve cover to the air filter.
-barb off the throttle body that sees boost/vac to “A”.
-“B” on catch can went to drivers side valve cover.
-“C” is plugged for right now until I can get another source to draw vacuum.