Road Racing Jerico 4 speed for sale
Road Racing Jerico 4 speed for sale Change of racing plan/direction forces sale. The original intent was to use this behind a big block chevy in a road race C4 Corvette. The transmission is a rebuilt Jerico from The Gear Box (734-946-6088 located in Michigan). Transmission was built to my specs in November 2004 and has been stored in my garage since delivery. The gear ratios installed are 1.78 first gear, 1.39 second gear, 1.18 third gear, and a 1.0 fourth gear. These gear ratios were selected as a good all around set for road racing, but they can be changed to nearly any ratio selection you might like by a transmission rebuilder. This transmission features clutchless up-shift capability and straight cut gears. Clutch can be used for up-shifts, but is only required for downshifting. This transmission was completely rebuilt and has not been used since.
This is what I paid for the package:
Jerico 4-speed Transmission… $2300.00
Long shifter and linkages (already installed on the trans)... $ 500.00
Price of Transmission and Shifter... $2800.00
I also have the following components to complete the installation…..
Tilton Sonic steel bell housing(allows extra ground clearance for lowered cars)... $ 305.00
Tilton lightweight 153 tooth flywheel... $ 76.00
Tilton button flywheel… $ 157.00
Tilton 7.25" Rally twin plate clutch… $ 475.00
Tilton 7.25" Disc pack… $ 250.00
Tilton clutch bolt kit… $ 20.00
Tilton hydraulic throw-out bearing... $ 149.00
Tilton ¾” bore clutch master cylinder... $ 69.00
Tilton Hydraulic line kit… $ 205.00
Price of other installation parts… $1706.00
Total price I paid for the whole package... $4506.00 (not including shipping)
The Rally twin plate clutch is rated at 840 lb-ft holding capacity. It’ll hold most anything you can throw in front of it. All parts are in new condition and have not been installed.
I'd let the whole deal go for $4k plus shipping.
This is what I paid for the package:
Jerico 4-speed Transmission… $2300.00
Long shifter and linkages (already installed on the trans)... $ 500.00
Price of Transmission and Shifter... $2800.00
I also have the following components to complete the installation…..
Tilton Sonic steel bell housing(allows extra ground clearance for lowered cars)... $ 305.00
Tilton lightweight 153 tooth flywheel... $ 76.00
Tilton button flywheel… $ 157.00
Tilton 7.25" Rally twin plate clutch… $ 475.00
Tilton 7.25" Disc pack… $ 250.00
Tilton clutch bolt kit… $ 20.00
Tilton hydraulic throw-out bearing... $ 149.00
Tilton ¾” bore clutch master cylinder... $ 69.00
Tilton Hydraulic line kit… $ 205.00
Price of other installation parts… $1706.00
Total price I paid for the whole package... $4506.00 (not including shipping)
The Rally twin plate clutch is rated at 840 lb-ft holding capacity. It’ll hold most anything you can throw in front of it. All parts are in new condition and have not been installed.
I'd let the whole deal go for $4k plus shipping.
Registered User
Joined: Dec 2019
Posts: 2
Likes: 0
Trans still available Change of racing plan/direction forces sale. The original intent was to use this behind a big block chevy in a road race C4 Corvette. The transmission is a rebuilt Jerico from The Gear Box (734-946-6088 located in Michigan). Transmission was built to my specs in November 2004 and has been stored in my garage since delivery. The gear ratios installed are 1.78 first gear, 1.39 second gear, 1.18 third gear, and a 1.0 fourth gear. These gear ratios were selected as a good all around set for road racing, but they can be changed to nearly any ratio selection you might like by a transmission rebuilder. This transmission features clutchless up-shift capability and straight cut gears. Clutch can be used for up-shifts, but is only required for downshifting. This transmission was completely rebuilt and has not been used since.
This is what I paid for the package:
Jerico 4-speed Transmission… $2300.00
Long shifter and linkages (already installed on the trans)... $ 500.00
Price of Transmission and Shifter... $2800.00
I also have the following components to complete the installation…..
Tilton Sonic steel bell housing(allows extra ground clearance for lowered cars)... $ 305.00
Tilton lightweight 153 tooth flywheel... $ 76.00
Tilton button flywheel… $ 157.00
Tilton 7.25" Rally twin plate clutch… $ 475.00
Tilton 7.25" Disc pack… $ 250.00
Tilton clutch bolt kit… $ 20.00
Tilton hydraulic throw-out bearing... $ 149.00
Tilton ¾” bore clutch master cylinder... $ 69.00
Tilton Hydraulic line kit… $ 205.00
Price of other installation parts… $1706.00
Total price I paid for the whole package... $4506.00 (not including shipping)
The Rally twin plate clutch is rated at 840 lb-ft holding capacity. It’ll hold most anything you can throw in front of it. All parts are in new condition and have not been installed.
I'd let the whole deal go for $4k plus shipping.
This is what I paid for the package:
Jerico 4-speed Transmission… $2300.00
Long shifter and linkages (already installed on the trans)... $ 500.00
Price of Transmission and Shifter... $2800.00
I also have the following components to complete the installation…..
Tilton Sonic steel bell housing(allows extra ground clearance for lowered cars)... $ 305.00
Tilton lightweight 153 tooth flywheel... $ 76.00
Tilton button flywheel… $ 157.00
Tilton 7.25" Rally twin plate clutch… $ 475.00
Tilton 7.25" Disc pack… $ 250.00
Tilton clutch bolt kit… $ 20.00
Tilton hydraulic throw-out bearing... $ 149.00
Tilton ¾” bore clutch master cylinder... $ 69.00
Tilton Hydraulic line kit… $ 205.00
Price of other installation parts… $1706.00
Total price I paid for the whole package... $4506.00 (not including shipping)
The Rally twin plate clutch is rated at 840 lb-ft holding capacity. It’ll hold most anything you can throw in front of it. All parts are in new condition and have not been installed.
I'd let the whole deal go for $4k plus shipping.
Registered User
Joined: Dec 2019
Posts: 2
Likes: 0
