Where are you mounting wet shots?
Where are you mounting wet shots? As the title says, how is everyone doing a wet shot after the MAF w/o being direct port injection?Im looking at doing a wet shot, but obviously need to mount after the MAF, how is everyone doing this?Do I need to do solid mounts and then drill and tap b/w MAF and TB?Any sugestions or if you have done it let me know, thanks all.
Originally Posted by Ed Blown Vert
NX sells either the shark nozzle you can mount after the MAF.
Or get their MAF kit.
Or get their MAF kit.
Just as ed blown vert showed you. That is the NX maf kit ( www.Nitrousoutlet.com ). You can also run the nozzle right into your airtube belows after the MAF, or Nitro dave has just designed a plate that goes behind your TB.
Trending Topics
You can just drill a hole in your bellows and mount it there thats what I did and what most people I have seen do with the basic NX Nozzle kit. I am also going to upgrade to Nitro's dave's Plate system also. If I were to buy a kit know I would just buy Nitro's Dave's Plate system as its only $650 and looks like a very clean install and appearance when on the car. Here's the link that has some pics https://ls1tech.com/forums/showthrea...9&page=1&pp=20
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by LowETz
Here's some of my TNT kit. Sorry 'bout the poor pic quality, but you get the gist-
nice setup
Thanx man- Yeah.... Fuel/N2o on the cowl. Liquid filled Marshal guages. Also have preaaure guage on the bottle and the Fuel guage before the fuel noid. Just like seeing what's up(or down)while in motion, and I guess I'm still too old school.... I like the mechanical guages.
Here's some pics from outside the car showing (if you look hard enough
)the guages on the cowl, and yes it's a factory WS6 hood.
Here's some pics from outside the car showing (if you look hard enough
)the guages on the cowl, and yes it's a factory WS6 hood. Last edited by LowETz; Nov 18, 2005 at 12:40 PM.
Originally Posted by XTrooper
Mine is mounted in the hose coupling just in front of the throttle body. However, I'm switching soon to Nitro Dave's plate. 
Looks like a nice plate for it, whats included in the kit?Can I just get the plate an will that work with most applications?
