New LS1/LT1 plate systems!!!
#1
New LS1/LT1 plate systems!!!
We have a new style plate system for the LS1 and LT1 applications.These plates will not have the distribution problems that some of the systems on the market now have.We will be posting up pricing and taking pre orders shortly
Dave
Dave
#7
11 Second Club
Join Date: Nov 2001
Location: NE PA
Posts: 1,320
Likes: 0
Received 0 Likes
on
0 Posts
There's one pic in the other thread.
https://ls1tech.com/forums/nitrous-oxide/379276-sneak-peek-ls1-plate.html
https://ls1tech.com/forums/nitrous-oxide/379276-sneak-peek-ls1-plate.html
Trending Topics
#17
TECH Senior Member
iTrader: (7)
The plumbing comes in from the rear so the fuel and nitrous have to make a 180 degree turn through the internal passages of the plate? Is that some kind of joke?
Andrew
Andrew
#19
Originally Posted by Project GatTagO
The plumbing comes in from the rear so the fuel and nitrous have to make a 180 degree turn through the internal passages of the plate? Is that some kind of joke?
Andrew
Andrew
This plate was desighned for the best distribution possible with placing a plate right up on the two front intake runners.Other plates we have seen on the market that are offered for GM EFI applications use a spray distribution that is desighned to spray towards the back of the intake.In some cases creating a distibution problem between cylinders.Our cross fire desighn will collide the fuel and nitrous together and then suck back into the intake track creating a better attomization.The desighn of how the nitrous and fuel flow through the plate may decrease the max hp flow ratings.This is why we said the plate will only flow 400 pluss hp.As for what we rated the plate for it will flow it just fine and make the advertised hp ratings we rated it for safely.The desighn of the plate is built to work for what it was intended for.
Thanks
Dave