FS: Stock wheels, Weld wheels, NX, & Spohn Stuff
FS: Stock wheels, Weld wheels, NX, & Spohn Stuff Stock firebird 16X8 rims Sold
Stock Camaro Z28 16X8 chrome wheels Sold
Weld Racing Drag Lite 15X10 rims with 7.5" backspacking and 4.75" bolt pattern. Comes with brand new center caps(not pictured). Rims are used have small scratches here and there but are in good condition. They are already drilled for rim screws. $250 price excludes shipping.
NX GM EFI kit for LS1 comes with 10# bottle(empty), complete kit, Nitrous outlet WOT bracket for LS1($30 value), smooth belows drilled for nitrous nozzled ($40 value), liquid filled pressure gauge on bottle ($25 value). Kit was installed but never used no bottle have been run through this kit. $500 shipping not included.
Brand new Spohn torque arm(mild steel with poly front bushing) for LS1 with long tubes. Sold
Brand new Spohn Pro-Series Rear Drag Sway Bar made out of chrome moly with adaptor kit for a Strange 12 bolt rear end. Normally would cost $375 I am selling for $325 price excludes shipping.
Stock Camaro Z28 16X8 chrome wheels Sold
Weld Racing Drag Lite 15X10 rims with 7.5" backspacking and 4.75" bolt pattern. Comes with brand new center caps(not pictured). Rims are used have small scratches here and there but are in good condition. They are already drilled for rim screws. $250 price excludes shipping.
NX GM EFI kit for LS1 comes with 10# bottle(empty), complete kit, Nitrous outlet WOT bracket for LS1($30 value), smooth belows drilled for nitrous nozzled ($40 value), liquid filled pressure gauge on bottle ($25 value). Kit was installed but never used no bottle have been run through this kit. $500 shipping not included.
Brand new Spohn torque arm(mild steel with poly front bushing) for LS1 with long tubes. Sold
Brand new Spohn Pro-Series Rear Drag Sway Bar made out of chrome moly with adaptor kit for a Strange 12 bolt rear end. Normally would cost $375 I am selling for $325 price excludes shipping.
Last edited by maddboost; Dec 11, 2005 at 12:55 PM.
Originally Posted by 4thGenCamaro
interested in the NX kit 
Im still not sure if I want to sell the NX kit I wanted to clean out my garage and free up some funds for a new truck im buying. But that NX kit might go on the new truck.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
