DRE 1.7 Shaft Rocker setup
DRE 1.7 Shaft Rocker setup I have two sets of DRE 1.7 rockers for sale due to the fact we are changing setups and will require offset rockers. These are the same rocker they use to private label for Comp. They have adjustable pushrod cups (ARP) but do require a very short pushrod and need the pushrod holes opened up in the head (top and sometimes bottom). These rockers also need a very good spring for stability even though they are one of the lighter aftermarket rockers on the market.
One set is brand new, never run. They have been bolted down and mocked up to check pushrod length, thats all. Asking $600. SOLD
The other set has about 2000 street miles with some high-RPM use but look new other than shiny pushrod cups. Asking $500 for these.
Thanks,
John
One set is brand new, never run. They have been bolted down and mocked up to check pushrod length, thats all. Asking $600. SOLD
The other set has about 2000 street miles with some high-RPM use but look new other than shiny pushrod cups. Asking $500 for these.
Thanks,
John
Last edited by SSP Racing; Aug 24, 2006 at 08:02 PM.
Originally Posted by 408ls1
picsTrending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
