American Racing Headers over the axle True-Duals!
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Dec 2001
Posts: 518
Likes: 0
From: Long Island, NY
American Racing Headers over the axle True-Duals! So, I finally have some pics for you guys...
I picked the car up today and couldn't be happier with the final product
First and foremost, I want to thank Nick and the the guys @ American Racing Headers for the amazing work they did on my car, as well as Kara again for all of the pics!
The set-up is as follows:
-1 7/8" primary ARH headers w/o fittings to 3" x-pipe, neck down to 2 1/2" and into two Magnaflow bullets, up over the axle and into two more 2 1/2" ARH supplied bullets and out through dual tips which I supplied. The entire set-up is stainless steel and sounds great!
I really couldn't be happier with the fit/finish and sound, it's amazing!
The sound is very very clean, deep, refined and not loud and obnoxious, EXACTLY what I wanted and could have hoped for in every way!
The car feels totally different, it pulls like crazy and definitly picked up A LOT of rwhp! I'll be dropping the car back off for a tune on the next day available and post final #'s.
BTW, Car is FILTHY underneath as I got caught in some rain when dropping the car off, ugggghh!
Now for the pics:
I picked the car up today and couldn't be happier with the final product
First and foremost, I want to thank Nick and the the guys @ American Racing Headers for the amazing work they did on my car, as well as Kara again for all of the pics!
The set-up is as follows:
-1 7/8" primary ARH headers w/o fittings to 3" x-pipe, neck down to 2 1/2" and into two Magnaflow bullets, up over the axle and into two more 2 1/2" ARH supplied bullets and out through dual tips which I supplied. The entire set-up is stainless steel and sounds great!
I really couldn't be happier with the fit/finish and sound, it's amazing!
The sound is very very clean, deep, refined and not loud and obnoxious, EXACTLY what I wanted and could have hoped for in every way!
The car feels totally different, it pulls like crazy and definitly picked up A LOT of rwhp! I'll be dropping the car back off for a tune on the next day available and post final #'s.
BTW, Car is FILTHY underneath as I got caught in some rain when dropping the car off, ugggghh!
Now for the pics:
Last edited by cobrakillerta; Jun 3, 2007 at 03:29 PM.
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Dec 2001
Posts: 518
Likes: 0
From: Long Island, NY
Thanks for all the compliments...don't compliment me though, praise them!
They did the amazing work!
2 Magnaflow bullets and 2 American Racing Header supplied bullets
To do it this nice and the right way something like this really should be done on an in-house case by case basis. I believe that's the only way for it to suite you perfectly and come out the best possible.
I'll get some sound clips asap...it started raining just as I got her in the garage
They did the amazing work!
Originally Posted by Black Sunshine/ 00SS
Look good. What mufler are you using?
Originally Posted by VinR1
tell 'em they're sitting on a goldmine if they'd mass-produce those things
looks awesome BTW - post some sound clips!
looks awesome BTW - post some sound clips!
I'll get some sound clips asap...it started raining just as I got her in the garage
That's awesome! 
Looks like they did a nice a clean job! Can't wait to hear clips! How's the gound clearance.
This is the first time I have seen duals utilize 2 sets of mufflers. Speaking of which those really aren't bullets they are more of a tube muffler, much larger than regular bullets...I don't know what they're actually called, but I bet the sound is very refined. With that much muffling its got to be somewhat quiet when you're not on it, and nice and deep when you are on it.
Looks like they did a nice a clean job! Can't wait to hear clips! How's the gound clearance.This is the first time I have seen duals utilize 2 sets of mufflers. Speaking of which those really aren't bullets they are more of a tube muffler, much larger than regular bullets...I don't know what they're actually called, but I bet the sound is very refined. With that much muffling its got to be somewhat quiet when you're not on it, and nice and deep when you are on it.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
12 Second Club
Joined: Sep 2005
Posts: 4,273
Likes: 0
From: Bucks County, Pa.
NICE!!! 
Where is this place located?? If I ever do TDs, guess where I'm going. All 304, and I can even get turndowns instead of tips?! This is what makes the "case by case basis" more than worth it!
Where is this place located?? If I ever do TDs, guess where I'm going. All 304, and I can even get turndowns instead of tips?! This is what makes the "case by case basis" more than worth it!
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Dec 2001
Posts: 518
Likes: 0
From: Long Island, NY
Originally Posted by Screamin_Z
very nice, how much did all this cost u w/o the tips and headers?
Honestly, your best bet is to contact Nick @ American Racing Headers direct for pricing. It could vary quite a bit for different set-up's and goals such as cats vs. no cats, muffler choice, number of mufflers, etc.
You could PM me if you'd like for contact info
Originally Posted by dailydriver
NICE!!!
Where is this place located?? If I ever do TDs, guess where I'm going. All 304, and I can even get turndowns instead of tips?! This is what makes the "case by case basis" more than worth it!
Where is this place located?? If I ever do TDs, guess where I'm going. All 304, and I can even get turndowns instead of tips?! This is what makes the "case by case basis" more than worth it!
Tech Resident
Joined: Jan 2006
Posts: 5,117
Likes: 3
From: Philly
Originally Posted by oange ss
why did they use so many mufflers ?
Looks amazing, I'm jealous.
1 question: Why did you get 1 7/8 instead of 1 3/4 when you weren't going to go 3" all of the way back?
Yeah, there have been a couple of listings in the sponsor section, but I forget which companies.
1 question: Why did you get 1 7/8 instead of 1 3/4 when you weren't going to go 3" all of the way back?
Originally Posted by TheBlurLS1
Do any of our sponsors sell these headers?