ondatrack

iTrader: (15)

Category: Racing Parts
Price: $2900
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, 04-06 Pontiac GTO
Location (State): CA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

I upgraded to a 122 Magnacharger so I have decided to sell this one that was on my 2006 GTO for about 35k miles. Works great and I upgraded it with custom bolt on hubs and pulleys from Smoothflow Pulleys less than 5k miles ago. It is set up with 3.2 and 3 inch pulleys on the rear for a current 1.06 overdrive ratio instead of the stock .84 underdrive that is standard for these kits. You can unbolt and switch the rears for a .94 underdriven ratio also. The front uses a standard Magnacharger 4 bolt pattern so any newer pulley will work on it and it can be changed quickly to a smaller pulley for more boost for a track day or s trip to Mexico. It currently has a 3.1 inch front pulley. I also upgraded the jackshaft bearings when I did the pulleys.

This is a complete kit minus the air intake which I used for my MP122. You can fab up a hardcore intake or buy a new one from Superchargersonline.com. I am including a new Magnavolt fuel pump booster and a used and a new tensioner. It has the original 42lb injectors that come with the kit. The heat exchanger had a couple of dents from when my GTO was totalled in 2011 but they do not effect cooling as I ran it 5k miles with no issues. It had one spot where it rubbed a small pin sized hole on my bent radiator support that I epoxied with no leaks after the fix.

I would prefer to sell local picked up in Hemet or Temecula California as shipping is expensive so I am pricing it picked up cash. If I ship and have to use PayPal then you would have to cover the cost of the fees.

If you buy it I will offer a brand new Comp Cam 218/230 on a 118 lsa that will add 50 hp over a stock cam on an LS2 with headers for an additional $250. I did a 218/224 Comp Cam on mine after the pulley upgrade and it really was a noticeable difference. I ended up going larger on the cam for my new 403.

ss496

iTrader: (7)

sent you a PM

ondatrack

iTrader: (15)

The camshaft is no longer available.

ondatrack

iTrader: (15)

I will consider shipping at the buyers expense. If you have a Fastenal store locally they seem to be the most reasonable for shipping something this size.

ondatrack

iTrader: (15)

Sold, Thank you LS1Tech.

JonnyiDFW

The Cam & Charger are sold??

Thanks,
Jonathan