98-02 Camaro/Firebird LS1 Full stainless exhaust, headers, mufflers, y-pipe
#1
Teching In
Thread Starter
Join Date: Sep 2017
Location: Central Ohio
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
98-02 Camaro/Firebird LS1 Full stainless exhaust, headers, mufflers, y-pipe
Category: Engine - Exhaust
Price: $1200
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): OH
Item Condition: Used
Engine: LS1/LS6
LS Engine?: Fits LS Engine
Setup consists of:
--Dynatech long tube Supermaxx headers (1 3/4"), T-304 stainless, EGR-ready, PN 115-732325 (These headers are for a 2000+ car, but can be used on '98+ if not using the EGR. Only difference between the years is the placement of the EGR system. But the headers will fit '98-'02.)
--Dynatech Supermaxx intermediate pipe (Y-pipe) with high flow cats, Stainless, PN 715-73220. 2.5"
--Magnaflow cat-back exhaust, center exit tips, 429 stainless, high polished rolled edge Quad tips. PN 16846. In-line with their quality of build, these tips do not hang down below the rear bumper like some
may think. They necesitate making a small notch in the bumper. The look and finish is worth the work of a small cut in your bumper. Muffler has a nice, moderate tone. I'd say midrange in noise level.
Included: EGR piping, tubes, pump. Rear exhaust hanger brackets, installation instructions. header bolts not included.
Note: If you don’t want to run the EGR system, as the headers are designed for; there are easy, cheap kits made by dozens of companies that block off the EGR ports on both the headers and the engine. So you can still use these headers even if you don’t need/want the EGR-compliant ports.
**Willing to separate the catback muffler setup from the headers/y-pipe, but it would be a much better value to purchase the full package. The headers and y-pipe will stay together, as they are designed to work as a kit.
$1,200 OBO. Item PICKUP only. no shipping.
Thanks,
Last edited by 9869KM; 12-11-2017 at 05:17 PM.