ls6 intake, 85mm tb, slp and stock maf, and more...
ls6 intake, 85mm tb, slp and stock maf, and more... Just re-did my intake setup from the lid back to the intake mani so I have some stuff for sale plus some other stuff that I've had for a while and just need to get rid of.
-Ls6 manifold without rails/injectors (about 55kmiles on it) - 350
-Stock injectors/rails- SOLD
-Professional products 85mm throttle body with reducer spacer (85mm to 76mm/ transition from tb to mani is spot on and smooth) No sensors, about 5k on it- SOLD
-SLP 01-02 85mm maf with pigtail (5k miles)- 110
-SLP lid, has hole for IAT and AIR, also has small hole with a bolt in it most likely from nitrous, pics below show bolt does not protrude into the inside of the lid very much. Also has rub mark on the neck from my hood.- SOLD
-Ls1 style vally cover. Has about 55k miles on it, have pcv tube with it also as seen in pics. - 25
-Stock ls1 maf, has about 50k miles on it with screen- 45
-AIR pump, has all hoses minus the ones that hook up to the headers- 15
-3 gauge pillar pod- 40
-autometer ultra-lite 2-1/16 A/F gauge- 35
-autometer ultra-lite 2-1/16 volt meter- 20
-1 Sumitumo 275/40/17 with a good 75%+ tread left- 50
-Passenger side T/A honeycomb tail light. Minimal scratch/scuff marks, tail light is darker though, moisture did get to this one-50
-Driver side T/A honecomb tail light. Damn near perfect, only issue is the outside tab had snapped at one point but I gorrilla glued it and never had a problem with it. Only selling this one because I had bought a pair to replace my passenger side, and the pair I bought were for the most part brand new. - 150
I will entertain trades just let me know what you have. Mainly looking for 1-7/8 kooks and a set of zr1's with 11's in the back with deep dish. NO tires. But again, I will entertain trades. Any questions feel free to ask. All parts are located in Kemah, Tx. I would like to keep sales local as I work out of town a lot and would have to most likely get my girl to grab the parts. And because of that meeting up will be done most likely at the front office of my storage unit.
ls6 intake
TB
SLP MAF
Stock TB
-Ls6 manifold without rails/injectors (about 55kmiles on it) - 350
-Stock injectors/rails- SOLD
-Professional products 85mm throttle body with reducer spacer (85mm to 76mm/ transition from tb to mani is spot on and smooth) No sensors, about 5k on it- SOLD
-SLP 01-02 85mm maf with pigtail (5k miles)- 110
-SLP lid, has hole for IAT and AIR, also has small hole with a bolt in it most likely from nitrous, pics below show bolt does not protrude into the inside of the lid very much. Also has rub mark on the neck from my hood.- SOLD
-Ls1 style vally cover. Has about 55k miles on it, have pcv tube with it also as seen in pics. - 25
-Stock ls1 maf, has about 50k miles on it with screen- 45
-AIR pump, has all hoses minus the ones that hook up to the headers- 15
-3 gauge pillar pod- 40
-autometer ultra-lite 2-1/16 A/F gauge- 35
-autometer ultra-lite 2-1/16 volt meter- 20
-1 Sumitumo 275/40/17 with a good 75%+ tread left- 50
-Passenger side T/A honeycomb tail light. Minimal scratch/scuff marks, tail light is darker though, moisture did get to this one-50
-Driver side T/A honecomb tail light. Damn near perfect, only issue is the outside tab had snapped at one point but I gorrilla glued it and never had a problem with it. Only selling this one because I had bought a pair to replace my passenger side, and the pair I bought were for the most part brand new. - 150
I will entertain trades just let me know what you have. Mainly looking for 1-7/8 kooks and a set of zr1's with 11's in the back with deep dish. NO tires. But again, I will entertain trades. Any questions feel free to ask. All parts are located in Kemah, Tx. I would like to keep sales local as I work out of town a lot and would have to most likely get my girl to grab the parts. And because of that meeting up will be done most likely at the front office of my storage unit.
ls6 intake
TB
SLP MAF
Stock TB
Last edited by Ballerado; Sep 10, 2011 at 04:09 PM.
You cant see it in the pic, but where the AIR hole is it does have the rubber gromet for it. I have that big screw in there to plug it off because I had deleted the AIR system. IAT hole has no gromet because I have re-used it.
Trending Topics
Intake I will go 200to on the intake, I know they are asking 300+ for others on here but I bought one for $150 a couple weeks ago on CL.any let me know.you can text me @9794823965
