camshaft for 6.0
#1
camshaft for 6.0
hi
i need to your advice
i have gto l77 ( ls2 with 823 heads )
4l60e
3.7 gear
air intake
open headers
what about this camshaft for rolling 40-400 & 80-400
Titan King LS3 Camshaft (232/244-112.5+3)
Hydraulic Roller Camshaft
Maximum Street - Street/Strip - Race
Duration at .050: 232/244
112.5 Lobe Center Angle with a 109.5 Intake Centerline
Lift with 1.7 Rocker Arm Ratio: .621"/.604"
Recommended Displacement: 6.0-6.2 Liter Engines
Cylinder Heads: Rectangle Port
Recommended Compression Ratio: 10.3-11.5:1
Recommended Headers: 1 3/4"-1 7/8"
Recommended Stall Converter: 3500-5000
Recommended Rear Axle Ratio: 3.73-4.56
i need to your advice
i have gto l77 ( ls2 with 823 heads )
4l60e
3.7 gear
air intake
open headers
what about this camshaft for rolling 40-400 & 80-400
Titan King LS3 Camshaft (232/244-112.5+3)
Hydraulic Roller Camshaft
Maximum Street - Street/Strip - Race
Duration at .050: 232/244
112.5 Lobe Center Angle with a 109.5 Intake Centerline
Lift with 1.7 Rocker Arm Ratio: .621"/.604"
Recommended Displacement: 6.0-6.2 Liter Engines
Cylinder Heads: Rectangle Port
Recommended Compression Ratio: 10.3-11.5:1
Recommended Headers: 1 3/4"-1 7/8"
Recommended Stall Converter: 3500-5000
Recommended Rear Axle Ratio: 3.73-4.56
#2
#6
Old School Heavy
iTrader: (16)
hi
i need to your advice
i have gto l77 ( ls2 with 823 heads )
4l60e
3.7 gear
air intake
open headers
what about this camshaft for rolling 40-400 & 80-400
Titan King LS3 Camshaft (232/244-112.5+3)
Hydraulic Roller Camshaft
Maximum Street - Street/Strip - Race
Duration at .050: 232/244
112.5 Lobe Center Angle with a 109.5 Intake Centerline
Lift with 1.7 Rocker Arm Ratio: .621"/.604"
Recommended Displacement: 6.0-6.2 Liter Engines
Cylinder Heads: Rectangle Port
Recommended Compression Ratio: 10.3-11.5:1
Recommended Headers: 1 3/4"-1 7/8"
Recommended Stall Converter: 3500-5000
Recommended Rear Axle Ratio: 3.73-4.56
i need to your advice
i have gto l77 ( ls2 with 823 heads )
4l60e
3.7 gear
air intake
open headers
what about this camshaft for rolling 40-400 & 80-400
Titan King LS3 Camshaft (232/244-112.5+3)
Hydraulic Roller Camshaft
Maximum Street - Street/Strip - Race
Duration at .050: 232/244
112.5 Lobe Center Angle with a 109.5 Intake Centerline
Lift with 1.7 Rocker Arm Ratio: .621"/.604"
Recommended Displacement: 6.0-6.2 Liter Engines
Cylinder Heads: Rectangle Port
Recommended Compression Ratio: 10.3-11.5:1
Recommended Headers: 1 3/4"-1 7/8"
Recommended Stall Converter: 3500-5000
Recommended Rear Axle Ratio: 3.73-4.56