NC01TA

It's been rather rainy plus I wanted the paint to dry real good for at least a week before taking it out. I'm really pleased and would never know the difference.
For those that missed my mishap, here is the link below if interested. It involved the right rear quarter, plus I had the front bumper pulled and painted while it was in the shop (2 decades of accumulated micro rock chips are now gone). An added bonus was when the repair was done, the rear bumper was pulled and clear coated. This process removed some fine hairline scratches accumulated over time.
It sure is difficult to take photos without reflections.
https://ls1tech.com/forums/paint-bod...literally.html


Right quarter repaired


Front bumper and rear quarter looking good


Same angle


Front bumper pulled and painted


Rear bumper was pulled too during the repair and clear coated afterwards

RPM WS6

iTrader: (3)

Looks like they did a really nice job on the body repair!

In that first picture, it looks like the rear bumper cover is almost touching the right tail pipe where it wraps under, by the exhaust tip (right side only). Did it get distorted somehow during the removal? Maybe it just needs to be massaged back into place, or is it just some really odd angle/reflection causing this effect in the picture? I can't really see it in the last picture of the rear, only in the first shot where the exhaust tips are very visible.

Tommy42088

Looks good, what's going on with the bumper on the passenger side by the muffler?

NC01TA

Thanks so much guys!! My old eyes didn't even look there. It was a fastener that came undone underneath. I was able to re-attach it myself. Much better. I'll have to keep an eye on it though in case it comes undone again. A quick ultra close 'after' photo in the garage. It's dark and raining again. Sorry.

RPM WS6

iTrader: (3)

Glad that was a simple fix, good deal!