When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Supposedly mine has shipped, if something changes I'd be interested for sure, as long as it's a 2 or 3 bar and will fit directly in an ls6 intake.
I believe I used one off a Colbalt SS either 06 or 07 (supercharged). 2.5 Map and grind the retaining clip off and it went right in. Ordered directly from parts department at Chevy.
I believe I used one off a Colbalt SS either 06 or 07 (supercharged). 2.5 Map and grind the retaining clip off and it went right in. Ordered directly from parts department at Chevy.
Good to know. I read that some that fit the cobalt SS, when the retaining clip is ground off it left the internals of the sensor exposed? Maybe they were not genuine GM parts?
nothing is exposed. there is a c-clip that would go on the cobalt intake that ours doesn't need because it just pushes in (ground it down and you cannot even tell). plugs right in and is more optimal for tuning (from my understanding).