Would you run headers that were wrapped?
#1
Thread Starter
TECH Fanatic
iTrader: (3)
Joined: Jun 2014
Posts: 1,177
Likes: 44
From: Noblesville, IN
Would you run headers that were wrapped?
Been searching around for a set of headers for my C5, stumbled on these from a recycling place. They look solid, but were very clearly wrapped. At under 300 they look like a good deal, but I don't want to buy something broken. Thoughts?
#2
If they're stainless steel I would purchase them and make a stop into Oriley's Auto Parts to buy some White Diamond metal polish. After a few hours of elbow grease those will polish right up and look as good as new. All the ones I've seen online look to have flanged ends. Do you know who made them and what they came off of?
Last edited by 01CamaroSSTx; 06-26-2024 at 10:32 PM.
The following 2 users liked this post by LilJayV10:
G Atsma (06-27-2024), Y2K_Frenzy (06-27-2024)
#5
Thread Starter
TECH Fanatic
iTrader: (3)
Joined: Jun 2014
Posts: 1,177
Likes: 44
From: Noblesville, IN
So after doing a bit more research, I decided not to get them. I'm fairly certain they're Speed Engineering headers, which the small difference between the new vs used cost isn't worth it. I appreciate the responses though, thanks guys!