Okay, I noticed today I have some torque steer going on. On the highway in 6th, if I give it gas, it will slightly pull to the left, let off the gas, it will drift slightly back to the right. Its happening all the time.

For the rear end, I have tubular LCAs, panhard bar and torque arm. I assume the poly bushing are good, but I have not looked at them in ten years. For the front, I replaced the LCAs, UCAs, ball-joints, shocks and motor mounts a couple of years ago. Same with the swaybar link ends.

Its not dangerous, just annoying. BTW, I do have a true-track LSD if it matters.

So where do I start here?

Thanks
Bill

 

Are any of the rear arms adjustable? If so you might have both side not adjusted evenly possible causing your issues.