Can my Detroint Trutrac cause torque steering?
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Okay, I noticed today I have some torque steer going on. On the highway in 6th, if I give it gas, it will slightly pull to the left, let off the gas, it will drift slightly back to the right. Its happening all the time.
For the rear end, I have tubular LCAs, panhard bar and torque arm. I assume the poly bushing are good, but I have not looked at them in ten years. For the front, I replaced the LCAs, UCAs, ball-joints, shocks and motor mounts a couple of years ago. Same with the swaybar link ends.
Its not dangerous, just annoying. Someone told me a Trutrac will cause this. Is that true?
Thanks
Bill
For the rear end, I have tubular LCAs, panhard bar and torque arm. I assume the poly bushing are good, but I have not looked at them in ten years. For the front, I replaced the LCAs, UCAs, ball-joints, shocks and motor mounts a couple of years ago. Same with the swaybar link ends.
Its not dangerous, just annoying. Someone told me a Trutrac will cause this. Is that true?
Thanks
Bill