New PBT Special! CryoTech Rotors and Hawk HPS Pads $299.00 plus shipping
#1
FormerVendor
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
New PBT Special! CryoTech Rotors and Hawk HPS Pads $299.00 plus shipping
Cryogenically treated rotors are now available from PBT!
Most of us are aware of the reported advantages of Cryogenically processed rotors in a street performance application... Some of the potential benefits include increased pad and rotor life, increased fatigue strength, increased resistance to cracking and warping... These points alone made it easy to decide to go with the Cryo process across our entire rotor line!
We will begin by launching our most popular package for the 98-02 F-body camaro/firebirds... Front and rear drilled and slotted CryoTech rotors with Hawk HPS pads: $299.00 plus shipping!
Need a set for your LT-1, GTO or other vehicle? Give me a call or PM for pricing and availability.
I'll begin shipping the first packages on Wednesday. We are in full, continuous production and will be able to quickly fill as many orders as we recieve.
The phone is a direct line to me and I will be logged in here and checking my PM's daily! Please PM me your contact information or call (951) 757-8267 to place your order. I accept Visa, M/C and PayPal. My customer service record speaks for itself. You can count on me to do what it takes to make your brake parts purchase the best available on the net or anywhere else!
On car photos courtesy of PewterY2KZ28
I'd like to thank all my loyal customers here on LS1Tech! Your good words and referals make doing buisness here a pleasure. If there is anything else I can ever do for you, dont hesitate to ask!
Harry
PLEASE NOTE: I plan to keep the price as long as I can but it is completely at my discretion. Prices are subject to change without notice.
Most of us are aware of the reported advantages of Cryogenically processed rotors in a street performance application... Some of the potential benefits include increased pad and rotor life, increased fatigue strength, increased resistance to cracking and warping... These points alone made it easy to decide to go with the Cryo process across our entire rotor line!
We will begin by launching our most popular package for the 98-02 F-body camaro/firebirds... Front and rear drilled and slotted CryoTech rotors with Hawk HPS pads: $299.00 plus shipping!
Need a set for your LT-1, GTO or other vehicle? Give me a call or PM for pricing and availability.
I'll begin shipping the first packages on Wednesday. We are in full, continuous production and will be able to quickly fill as many orders as we recieve.
The phone is a direct line to me and I will be logged in here and checking my PM's daily! Please PM me your contact information or call (951) 757-8267 to place your order. I accept Visa, M/C and PayPal. My customer service record speaks for itself. You can count on me to do what it takes to make your brake parts purchase the best available on the net or anywhere else!
On car photos courtesy of PewterY2KZ28
I'd like to thank all my loyal customers here on LS1Tech! Your good words and referals make doing buisness here a pleasure. If there is anything else I can ever do for you, dont hesitate to ask!
Harry
PLEASE NOTE: I plan to keep the price as long as I can but it is completely at my discretion. Prices are subject to change without notice.
Last edited by shockwaveharry; 03-11-2008 at 02:04 PM.
#5
FormerVendor
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Harry
Trending Topics
#9
FormerVendor
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Seriously! I'm working hard to be competitively priced here on the forum. Margins are thin but as a manufacturer, alot of sales make it worthwhile. No middle man taking his cut on the rotors. That's good for both you and me!
I'm out of the office so I'll PM you the shipping price a little later.
Harry
#10
TECH Fanatic
iTrader: (1)
Seriously! I'm working hard to be competitively priced here on the forum. Margins are thin but as a manufacturer, alot of sales make it worthwhile. No middle man taking his cut on the rotors. That's good for both you and me!
I'm out of the office so I'll PM you the shipping price a little later.
Harry
JC
#11
FormerVendor
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
I'm shipping out over 70lbs of brake parts and it will vary anywhere between $30 here on the left coast to over $70 back east. I use UPS and charge their published rates based on weight and destination.
What are the rotors made of? I machine OEM replacement rotors made of cast iron. Essentially all brake rotors are made of cast iron. You could buy carbon fiber rotors but you don't want to know how much they'll cost!!
If you would like to buy the rotors and pads from me, please PM your contact information or call me direct at 951-757-8267
Harry
#12
TECH Enthusiast
iTrader: (15)
Sorry for the confusion, i saw 2 links under "Sponsor Specials" and got the two of you confused. I'm ready to order a set from someone so for my sake, could you tell me any known differences between your product and theirs? It seems that thier rotors are CNC'd aluminum.
Hate to play devils advocate but as a business man yourself, you understand the desire to get the best bang for your buck.
Thanks again for all the input!
Hate to play devils advocate but as a business man yourself, you understand the desire to get the best bang for your buck.
Thanks again for all the input!
Last edited by sneaky7980; 03-11-2008 at 10:39 PM.
#13
FormerVendor
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for the confusion, i saw 2 links under "Sponsor Specials" and got the two of you confused. I'm ready to order a set from someone so for my sake, could you tell me any known differences between your product and theirs? It seems that thier rotors are CNC'd aluminum. I guess that would make up for the difference in shipping costs.
Hate to play devils advocate but as a business man yourself, you understand the desire to get the best bang for your buck.
Thanks again for all the input!
Hate to play devils advocate but as a business man yourself, you understand the desire to get the best bang for your buck.
Thanks again for all the input!
We all offer the same style and quality product (sorry... No CNC'd alumimum from either one of us). I try to stand out by doing my very best to offer world-class customer service! I've done it with every buisness I've owned (all two of them) and everywhere I've worked (The largest Mercedes-Benz dealer in the world). Honesty, Integrity and communication are key elements to a successful buisness and thats what I offer in addition to a quality, well priced product.
I'm hoping that, ultimately, you will decide to purchase from me. It's selfish, but I want your business!
Harry
#14
FormerVendor
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
NEW! Drilled Only Design Now Available...
I've had a few requests for a "drilled only" rotor and I think it looks pretty good so, since I have the program, I'll offer it up to whoever would like a set!
The picture below shows the new design, as well as illustrates the difference between the rotors after Zinc plating (on the left) and before (on the right).
Harry
The picture below shows the new design, as well as illustrates the difference between the rotors after Zinc plating (on the left) and before (on the right).
Harry