400 sbc build help
#1
Teching In
Thread Starter
Join Date: Oct 2011
Location: duluth,mn
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hey guys i just got a low mile 400 sbc out of a van and was wondering if i put my vortec 906 heads and a comp xe 284 cam in it edelbrock air gap intake, 750 holley, how much power would i be looking at.........and possible 1/4 mile times in a 86 iroc-z
#3
On The Tree
Join Date: Mar 2009
Location: Central NJ
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Make sure the Vortech heads chambers are compatible with your pistons - you don't want compression ratios way too low or way too high.
400 is a weird beast - it needs more cam than you might think and can use larger cc heads without total destruction of the bottom end. Vortech heads will give you a boatload of TQ if they don't screw up the compression...
400 is a weird beast - it needs more cam than you might think and can use larger cc heads without total destruction of the bottom end. Vortech heads will give you a boatload of TQ if they don't screw up the compression...