Heads selection for 350
Thread Starter
Teching In
Joined: Aug 2004
Posts: 38
Likes: 0
Heads selection for 350 hi guys
im looking into building up a 350 chev, EVENTUALLY i want to run some forced induction but at first it will just be a nice n/a cruiser.
Its also a budget setup in that i cant spend too much especially on heads.
Ive read a bit into it and im liking the sound of vortec heads, sdpc sell ones modified for up to 600lift so that will allow me to run a healthy roller cam i guess. Pretty cheap for about $1100 shipped to australia.
My question is can i do better than these heads or are they the bets bang for your buck? i dont mind buying the specific vortec intake manifold so that dont bother me..
On ebay i found a set of new alloy heads for a great price but i dunno exactly what they are... ill let you's check it out:
http://cgi.ebay.com/ebaymotors/ws/eB...category=33617
even though they are bare its not expensive to fill them up.. alloy is pretty desirable afterall!
What you's think?
im looking into building up a 350 chev, EVENTUALLY i want to run some forced induction but at first it will just be a nice n/a cruiser.
Its also a budget setup in that i cant spend too much especially on heads.
Ive read a bit into it and im liking the sound of vortec heads, sdpc sell ones modified for up to 600lift so that will allow me to run a healthy roller cam i guess. Pretty cheap for about $1100 shipped to australia.
My question is can i do better than these heads or are they the bets bang for your buck? i dont mind buying the specific vortec intake manifold so that dont bother me..
On ebay i found a set of new alloy heads for a great price but i dunno exactly what they are... ill let you's check it out:
http://cgi.ebay.com/ebaymotors/ws/eB...category=33617
even though they are bare its not expensive to fill them up.. alloy is pretty desirable afterall!
What you's think?
TECH Resident
Joined: Jan 2003
Posts: 855
Likes: 0
From: AUSTIN TX
I do not know how much shipping would be, but for less than that you can get a set of Edelbrock ETEC heads. These are supposed to be a fairly awesome street head. Also, I heard Pro Action (or whatever that head co. in Australia was) is supposed to be reopening under new management. You may try and find out, I am sure it would save you some on shipping.
