Thirdgen camaros with modified 350 blocks??
Thread Starter
Teching In
Joined: Mar 2006
Posts: 23
Likes: 0
From: Houston Tx.
Thirdgen camaros with modified 350 blocks?? Well guys I have a third gen camaro and im barely thinking about modifiying my motor but want to know how to built it right with the right parts so if anyone has any third gen pics of their engines post please so i can get an idea...thanks 
Launching!
Joined: Feb 2006
Posts: 278
Likes: 3
From: VT
Check out my page, near the bottom, there are photos of my 88 GTA that I did an engine swap to.
I recomend buying a complete crate motor from places like SDPC. They have several motors that are good deals. Probably the most versatile is the 350 HO. Its a complete long block with a 4 bolt main, PM rods, and Vortec heads. They also sell the Ram Jet 350 which is a complete plug and play fuel injection engine.
The one I bought was the SD 350 tpi engine. It has the 4 bolt mains, PM rods, LT4 hot cam, Vortec heads, 1.6 ratio rockers and an Edlebrock base plate. This engine I fully recomend for a third gen that is already a TPI car.
357 hp and it has a warranty This one is definately built right.
I recomend buying a complete crate motor from places like SDPC. They have several motors that are good deals. Probably the most versatile is the 350 HO. Its a complete long block with a 4 bolt main, PM rods, and Vortec heads. They also sell the Ram Jet 350 which is a complete plug and play fuel injection engine.
The one I bought was the SD 350 tpi engine. It has the 4 bolt mains, PM rods, LT4 hot cam, Vortec heads, 1.6 ratio rockers and an Edlebrock base plate. This engine I fully recomend for a third gen that is already a TPI car.
357 hp and it has a warranty This one is definately built right.
